PDA

View Full Version : 250TI Cabinet Colors



sourceoneaudio
01-28-2007, 10:23 AM
What were all the colors/wood types on 250TI's? Also when was the Teak from Japan no longer allowed for import to the US?

J/S-S1A :D

Robh3606
01-28-2007, 10:47 AM
Look in the Library. That's what it's for.


http://www.lansingheritage.org/


Rob:)

sourceoneaudio
01-28-2007, 10:53 AM
Rob,
I ran a search outside the library and nothing came up. Thanx for the tip. What about the Teak wood question?

J/S-S1A :blink:

Robh3606
01-28-2007, 11:20 AM
This is a speaker site. Why would we know when they stopped importing teak from Japan???

Rob:blink:

Titanium Dome
01-28-2007, 11:29 AM
This is a speaker site. Why would we know when they stopped importing teak from Japan???

Rob:blink:

In fairness to the question, I recall someone mentioning this in an L250 or 250Ti thread. Unfortunately, I don't remember the poster.

In fact, Japan is one of the largest importers of teak today, and partly responsible for the rapid deforestation of teak forests.

Robh3606
01-28-2007, 11:46 AM
In fairness to the question, I recall someone mentioning this in an L250 or 250Ti thread. Unfortunately, I don't remember the poster.


OK fair enough it just seems like a odd question. Certainly don't see the connection to say the L250. It's not like you can't get Teak or Teak vernier for a restoration or new build. I love the stuff, had lot's of Teak on my boat as trim. Just beautiful in any finish.


Rob,
I ran a search outside the library and nothing came up.

That's why it usually pays to look there first. I know this site really well and remember what info is in many of the threads. That said I can spend quite a bit of time searching for something. If it's in the Library it's quicker to go there.


Rob:)

sourceoneaudio
01-28-2007, 12:02 PM
It was a while back that I remember the subject being brought up. I'm looking at it from a rareness value on a set produced in Teak. But in the library under the factory lit I see no options for wood types on the 250TI's only on the L250's.
Were there options offered later? Or was the color/wood changes only offered on the L250's?

J/S-S1A :p

Robh3606
01-28-2007, 12:59 PM
I'm looking at it from a rareness value on a set produced in Teak. But in the library under the factory lit I see no options for wood types on the 250TI's only on the L250's.
Were there options offered later?


Post some pictures?? What exactly do you have??

Rob:)

Storm
01-28-2007, 01:02 PM
Didn't they make em' in birch :p ?

:rotfl:

-Storm.