TimG
12-01-2003, 11:00 AM
I found this modified JBL 2226 driver with a google search. Here are the T/S parameters. I want to know if I can build one by starting with a standard 2226H motor. The JBL site lists no replacement parts available and does not even list a recone kit.
HS-136:
Fs = 35 Hz
Xmax= 7.87 mm
Re= 5.0
Qts= 0.38
Qes= 0.4
Qms= 7.7
Vas= 153.5
Mms= 146 grams
Sd= 800 cm2
BL= 20 T/m
The driver was described as a 2226 with a bucking magnet and a heavier cone to allow it to be used as a subwoofer in the Synthesis 2 system. The driver in the cabinet is named the S2S system. Here is a pic link
http://www.jbl.com/home/products/product_detail.asp?ProdId=S2S&CheckProduct=Y
HS-136:
Fs = 35 Hz
Xmax= 7.87 mm
Re= 5.0
Qts= 0.38
Qes= 0.4
Qms= 7.7
Vas= 153.5
Mms= 146 grams
Sd= 800 cm2
BL= 20 T/m
The driver was described as a 2226 with a bucking magnet and a heavier cone to allow it to be used as a subwoofer in the Synthesis 2 system. The driver in the cabinet is named the S2S system. Here is a pic link
http://www.jbl.com/home/products/product_detail.asp?ProdId=S2S&CheckProduct=Y