loach71
06-13-2006, 05:36 PM
Well, I finally rounded up the components for the center channels (back and front) on my 6.1 system. Scrounging up this stuff was half the fun... Here goes:
JBL LE15 woofer
JBL PR15 passive radiator
JBL 2470 compression driver with new aluminum diaphragms (replaced the phenolic / linen ones) connected to ElectroVoice SM120A radial horn. (Same horn used in the EV Sentry III studio monitor) - I've attached the data sheet.
JBL 2404 radial tweeter.
This will be triamped, 24dB / octave equal component Sallen and Key Filters.
Im just modelling the enclosure with BB6 Pro.
Will upload some photos when contruction starts...
Any hints on crossover frequencies would be appreciated.
JBL LE15 woofer
JBL PR15 passive radiator
JBL 2470 compression driver with new aluminum diaphragms (replaced the phenolic / linen ones) connected to ElectroVoice SM120A radial horn. (Same horn used in the EV Sentry III studio monitor) - I've attached the data sheet.
JBL 2404 radial tweeter.
This will be triamped, 24dB / octave equal component Sallen and Key Filters.
Im just modelling the enclosure with BB6 Pro.
Will upload some photos when contruction starts...
Any hints on crossover frequencies would be appreciated.