Page 1 of 3 123 LastLast
Results 1 to 15 of 33

Thread: diy dd5500everest

  1. #1
    Member
    Join Date
    Dec 2009
    Location
    canada
    Posts
    32

    diy dd5500everest

    Name:  DSCN0870.jpg
Views: 5679
Size:  72.8 KBName:  DSCN0820.jpg
Views: 6853
Size:  53.8 KB


    is the 2 of 4 coat paint for my everest jbl

  2. #2
    Senior Member
    Join Date
    Mar 2004
    Location
    San Jose,Ca.
    Posts
    184
    What a great project !

    Always loved the look of the DD55000, bet they sound great too.

    But the price for a original pair...... ouch.

    Looking forward to seeing how yours turn out

  3. #3
    Senior Member richluvsound's Avatar
    Join Date
    Dec 2006
    Location
    london england
    Posts
    2,060
    I have always loved that speaker design ... well done !

  4. #4
    Senior Member caladois's Avatar
    Join Date
    Apr 2003
    Location
    FRANCE Lyon
    Posts
    335
    It seems that more and more replicas (including cab and crossover) have been built these years. HervéM on this forum did it with success !!!

    Nice work !
    Regards Stephane

  5. #5
    Member
    Join Date
    Dec 2009
    Location
    canada
    Posts
    32
    Name:  Photo 2010-11 186.jpg
Views: 10654
Size:  264.9 KBName:  planqedd.jpg
Views: 5171
Size:  91.8 KBello all jbl everest dd5500 lover.

    y need your held.

    y need the thickness and the dimention of the controle panel

    thank you very much.

  6. #6
    Member
    Join Date
    Dec 2009
    Location
    canada
    Posts
    32
    y need the thickness and the dimention of the controle panel

  7. #7
    Member
    Join Date
    Dec 2009
    Location
    canada
    Posts
    32

    dd5500

    Name:  dd5500ve.jpg
Views: 4932
Size:  98.8 KBnew jpg
    Name:  dd550045d.jpg
Views: 4886
Size:  73.2 KBName:  dd5500-e145.jpg
Views: 4767
Size:  84.7 KB

    the next step is painted the horn.

  8. #8
    Senior Member pos's Avatar
    Join Date
    May 2007
    Location
    France
    Posts
    2,627
    Nice job!
    Contact member Herve M, I think he has all the measurements you need:
    http://www.audioheritage.org/vbullet....php?9-herve-M

  9. #9
    Senior Member Lee in Montreal's Avatar
    Join Date
    Sep 2010
    Location
    Montréal
    Posts
    2,487
    Very nice job Roadmaster. Allow me to share a trick with you in regard of painting. When the wood is sanded, apply a few coats of floor varnish. Wet sand in between coats, until you reach a perfect smoothness to the hand. When your "foundation" is to your satisfaction, then a coat or two of paint will do. It will have a very regular texture, and a very, very smooth finish. Use oil-based varnish. Not acrylic.

  10. #10
    Member
    Join Date
    Dec 2009
    Location
    canada
    Posts
    32

    dd5500

    my box recived 6 coats of enamel on the side and sand and coat ,the center section (speaker)
    is not finish only 2 coats and non sand ,



    i didn't have enough paint and my store doesnt have anymore in stock.
    i was too anxious to put up the pictures, so i put them up like so.
    Concerning the horns, I'm waiting for an appointment with a paint pro Name:  DSCN0935.jpg
Views: 4727
Size:  71.3 KB
    Name:  DSCN0925.jpg
Views: 4685
Size:  86.5 KB

  11. #11
    Senior Member vettedrummer's Avatar
    Join Date
    Nov 2004
    Location
    Fraser, Michigan
    Posts
    199

    D55000

    Beautiful Job! Did you fabricate the horn or is it the same one used on the 55000? What are you using to drive it with? Are the measurements available some place for this or did you have one to work with when you did your measured drawings? Cheers, Frank
    K2S5800,Proj Array1000,880,1500,SynthesisTWO,250Ti,240Ti,120Ti& 18Ti,S38,Libra,Ti2K,Dorian,L36,88,99,100,300,Jubal ,Apollo,4425

  12. #12
    Junior Member
    Join Date
    Jan 2011
    Location
    chile
    Posts
    10

    Thumbs up dimentions

    Quote Originally Posted by roadmaster View Post
    Name:  Photo 2010-11 186.jpg
Views: 10654
Size:  264.9 KBName:  planqedd.jpg
Views: 5171
Size:  91.8 KBello all jbl everest dd5500 lover.

    y need your held.

    y need the thickness and the dimention of the controle panel

    thank you very much.
    top rectangle 36 x16 centimeters
    botton 17x16 " " 2 milemeters thick

  13. #13
    Member
    Join Date
    Dec 2009
    Location
    canada
    Posts
    32

    everest

    tank you , for the dimention

  14. #14
    Member
    Join Date
    Dec 2009
    Location
    canada
    Posts
    32

    new jpg of my jbl

    [url]http://www.audioheritage.org/vbulletin/attachment.php?attachmentid=54722&stc=1&d=13287522 89
    Attached Images Attached Images   

  15. #15
    Senior Member Lee in Montreal's Avatar
    Join Date
    Sep 2010
    Location
    Montréal
    Posts
    2,487
    wow

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •