Hi
I’m running 2332 horn with 2451Be drivers and figured that it might be time to look at a newer horn. Limited space makes using the bigger horns difficult.
I have read what I can find on the new compact waveguides but I can’t really find any sonic comparison between 2332 (DMS1 alu horn 1,5”) and the newer PT-F95HF (square 90x50 plastic 1,5” ). Any information as to if a swap from 2332 to PT-F95HF would be a meaningful sonic upgrade would be much appreciated.
An alternative would be SAM1HF but I think they may prove very difficult to source without the drivers and I already have the 2451Be’s and the 045Ti’s. –And I prefer the 4” drivers.
I’m currently planning for 2206H below, 2451Be’s on either 2332 or PT-F95HF and 045Ti’s on K2 9900 horns above. XO is planned to 11-1220 and 10k-ish between driver and 045*s. This would be backed up by two existing SUB1500 units below 80Hz.
All input appreciated and also info on how to source the above mentioned horns would be very welcome.
Best regards
//RoB