Page 1 of 5 123 ... LastLast
Results 1 to 15 of 61

Thread: Pictures from Northridge and LA

  1. #1
    Webmaster Don McRitchie's Avatar
    Join Date
    Apr 2003
    Location
    Winnipeg, Canada
    Posts
    1,753

    Pictures from Northridge and LA

    Last week, I had the opportunity to attend a reunion of sorts for last year's trip to Japan that was part of the Everest launch. A highlight of that trip was a side journey to the small Japanese city of Ichinoseki, around 400km north of Tokyo. Our destination was the famous jazz bar "Basie" that is owned by jazz drummer Shoji Sugawari; better known to his fans as Swifty. In return for his hospitality, Swifty was invited to visit the US this September, and in particular, visit JBL's facilities at Northridge. Joining Swifty was his wife and daughter and he was escorted by Ken Yasuda (president of Harman Japan) and Koji Onodera (chief editor of Stereo Sound magazine). The first series of pictures were taken at our first meeting at Northridge. The image immediately below is of Swifty and Greg Timbers at the Northridge front entrance. The second picture was my revenge for being ribbed for acting like a sterotypical Japanese tourist in the number of pictures that I take. At least I'm usually draped with only one camera, unlike Koji below. The last three pictures were taken from a guided tour of Northridge's main manufacturing floor. The fourth picture has the group examining the disassembled drivers from the Everest.
    Attached Images Attached Images      

  2. #2
    Webmaster Don McRitchie's Avatar
    Join Date
    Apr 2003
    Location
    Winnipeg, Canada
    Posts
    1,753
    All of the next series of pictures were taken from the manufacturing room devoted to assembly of high-end JBL and Revel loudspeakers. The first image shows two Everest enclosures rolling down the line as drivers and networks are installed. The second picture shows the manufacturing standard examples of the various systems assembled in this facility. I was surprised to find actual assembled systems used to set the manufacturing standard as I assumed that a set of stored performance parameters would fully describe any standard. While such performance parameters are an integral part of quality control, Greg explained that they cannot be relied upon exclusively. There are too many environmental variables (temperature, humidity etc) that cannot be effectively modeled. Therefore, a physical standard that is exposed to the same environmental conditions as the production units remains necessary for comprehensive quality control.

    The third photo shows a 1501AL driver being installed in one of the Everest enclosures. The fourth picture shows an S5800 and S4428 on the production line. The last picture shows a finished example of the just released S4600. This is a three way system utilizing an LE14 woofer, 175nd midrange driver and ultra high frequency driver.
    Attached Images Attached Images      

  3. #3
    Webmaster Don McRitchie's Avatar
    Join Date
    Apr 2003
    Location
    Winnipeg, Canada
    Posts
    1,753
    This next series of photos mainly regard an extended listening session of the S4600 and Everest. The S4600 is an amazing system that in Greg's words "sounds better than it has any right to" given its much smaller scale and I couldn't agree more. Still, it is not, and has no pretense, of being an Everest as illustrated by Swifty's rapt attention to this statement system in the second photo. The third photo shows left to right, Anthony, Greg Timbers, Koji Onodera and Ken Yasuda. In the fourth photo, Mark Gander joins us in the board room bearing gifts.
    Attached Images Attached Images     

  4. #4
    Webmaster Don McRitchie's Avatar
    Join Date
    Apr 2003
    Location
    Winnipeg, Canada
    Posts
    1,753
    Later that day, we were invited to Greg Timbers's home for a listening session of his custom built stereo and home theatre. This system is described in detail here. Suffice it to say that this ranks as the finest system I have heard in a home environment. For this visit, we were joined by Paul Bente, president of JBL. He is pictured at the back left in the fourth photo.
    Attached Images Attached Images      

  5. #5
    Webmaster Don McRitchie's Avatar
    Join Date
    Apr 2003
    Location
    Winnipeg, Canada
    Posts
    1,753
    That evening, Paul, his wife and son hosted us for dinner at an Italian restuarant in West Hollywood.
    Attached Images Attached Images     

  6. #6
    Webmaster Don McRitchie's Avatar
    Join Date
    Apr 2003
    Location
    Winnipeg, Canada
    Posts
    1,753
    The next day involved a visit to Ashcraft Designs, run by Dan Ashcraft who is responsible for the industrial design for the vast majority of JBL's high end systems for the past 20 years. In the first picture, Dan (standing far left) introduces us to his firm's associates. The second photo is in Dan's office. The third photo gives an overview of the main design office. This is new space for Dan's firm that has only occupied for two months. They are still working out the final remodeling which has resulted in a former warehouse becoming a visually striking workspace. The fourth photo illustrates a pair of JBL Ti10k speakers flanking a vintage pair of C38 Barons. The final picture illustrates the kitchen area of the office.
    Attached Images Attached Images      

  7. #7
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193
    Very nice!

    Picture 3 in set 2 is pretty impressive! I've given up trying to mount 1500AL's while the enclosures are vertical...

  8. #8
    Senior Member
    Join Date
    Feb 2004
    Location
    Central Coast California
    Posts
    9,042

    Deja Vu

    On the right side of the fourth picture in post #2 picture is an enclosure (K2 S5800 I think) with a piece of tape affixed with the letters "STD" on it. What does this mean? It's the second time I've seen this, the first being on the boxes my S2600s came in. Is this JBL speak for something?

    -----------------------------

    It's nice to see Greg Timbers has a "normal" room at home for his gear. (Even though the gear is not normal.)

    Thanks, Don. Hope there's more, plus some narrative.

  9. #9
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193
    I think the answer is in set 2, picture 2?

  10. #10
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    9,963
    There's something familiar in the next to last pic, but I JUST can't quite figure out what it is....

  11. #11
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193
    Quote Originally Posted by Zilch View Post
    There's something familiar in the next to last pic, but I JUST can't quite figure out what it is....
    That's what a fairly clean, clutter free room looks like Zilch... it's been a really long time huh?

    D'oh!

  12. #12
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    9,963
    Quote Originally Posted by Giskard View Post
    That's what a fairly clean, clutter free room looks like Zilch... it's been a really long time huh?

    D'oh!
    HEY! We could do groundplane in there, maybe?

  13. #13
    Senior Member timc's Avatar
    Join Date
    Oct 2006
    Location
    Norway
    Posts
    953
    VERY nice pictures. Thanks Don.

    Wich room is Greg Timber's?

    Best regards Tim

  14. #14
    JBL 4645
    Guest
    Don

    Thank you very much for the little picture show that was most enlightening the smiles on there faces went from one end of the factory floor to the other LOL it was has if there had there noses up close to candy shop window, feasting there eyes on the wondrous JBL products.

    Do you have any more pictures to come along oh yes please, Don that was exciting.

    I like those JBL project arrays delicious.

    That’s how I usually listen to my JBL control series most times Zen and peacefully listening to the soundtrack or music, Zen.

    But I bet those K2 sound miraculous!

    Attached Images Attached Images  

  15. #15
    Senior Member
    Join Date
    Jan 2006
    Location
    Montgomery, AL
    Posts
    171
    What was the event commemorating ... new ownership?

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •