Page 1 of 2 12 LastLast
Results 1 to 15 of 24

Thread: Smith Selsted Tweeters

  1. #1
    Senior Member Steve Schell's Avatar
    Join Date
    Jun 2003
    Location
    R.I.P.
    Posts
    1,458

    Smith Selsted Tweeters

    Hi group,

    Due to the continuing interest in the Distributed Source Horn design pioneered by Dr. Bob Hugh Smith, I thought I would post some pictures of the rare tweeters I was able to buy on ebay several years ago.

    Dr. Smith was a professor at U.C. Berkeley, and was very much a part of the northern CA audio scene from the late 1940s through the 1960s. He authored several articles, made several contributions to the art, and was highly respected. As far as I know he never commercialized any of his designs, but was an audio enthusiast equipped with the skills and education to do significant work. His most lasting work is probably the DSH design, used by JBL (2397) and many others over the years.

    In the late 1940s Smith was fascinated by the prospects of designing a practical tweeter to cover the top octave. At the time there had been very few real tweeters built; most notable were Leo Bostwick's Bell Labs design that was built by Western Electric as the 596A in the early 1930s for their Wide Range systems, and the Jensen model Q. Smith enlisted the help of his friend Walter Selsted, one of the top engineers at Ampex, to help with the project. After numerous prototypes, they built a small run of tweeters to use and to give to friends. They were never sold commercially. Smith and Selsted co-authored an article on the design that appeared in the January 1950 issue of Audio Engineering magazine. If there is some interest I will post the article on this thread.

    Anyway, after I bought these tweeters I contacted Walter Selsted. He was surprised and pleased to hear that any of these tweeters were still around, as they had only built between 20 and 25 of them in 1949.

    As you can see from the pictures, the diaphragm was spun from aluminum. The aluminum wire voice coil has no former, but is mounted directly to the diaphragm to save mass, just as in Bostwick's design. The motor is field coil rather than permanent magnet. The horn is formed from two identical cast aluminum sections. The voice coils of both of these drivers have continuity, but the lead outs need repair. I haven't gotten around to fixing them, so have not heard these units sing yet.
    Attached Images Attached Images      

  2. #2
    Senior Member
    Join Date
    Apr 2003
    Location
    Winnipeg Manitoba Canada
    Posts
    2,291
    I would love to give it a read!!!

  3. #3
    Senior Member trueview's Avatar
    Join Date
    Jan 2005
    Location
    San Clemente, CA
    Posts
    155
    those sure are pretty Steve...
    thanks for sharing

  4. #4
    pelly3s
    Guest
    those look rather interesting. i would love to hear how they sound

  5. #5
    Senior Member Steve Schell's Avatar
    Join Date
    Jun 2003
    Location
    R.I.P.
    Posts
    1,458

    Smith Selsted article

    Okay John, here is the article:
    Attached Images Attached Images    

  6. #6
    Dang. Amateur speakerdave's Avatar
    Join Date
    May 2003
    Location
    Northern California
    Posts
    3,734
    Thanks for that, Steve. That looks like an idea worth fooling around with. A copy of the article posted or by PM would be appreciated.

    Thanks,

    David

    Edit: You must have been posting while I was writing my response. Thanks.

  7. #7
    RIP 2010 scott fitlin's Avatar
    Join Date
    Apr 2003
    Location
    Brooklyn NY
    Posts
    4,343
    Where do you find these things Steve? Amazing!

    They probably will sound terrific, Baby Smith Horns.

    So cool!

    Fix em, and give a detailed report, please!

    scottyj

  8. #8
    Senior Member jbl4ever's Avatar
    Join Date
    Dec 2005
    Location
    McHenry IL
    Posts
    366
    Awesome work Mr Schell, can you post some dimensions on those horns.
    Very informative article thanks for the knowledge. Boy you are very lucky to find something this rare still around. Thanks Dave

  9. #9
    Senior Member Steve Schell's Avatar
    Join Date
    Jun 2003
    Location
    R.I.P.
    Posts
    1,458
    Pellys, I agree. I should be shot for not repairing them before now.

    I'm pretty sure that this work by Smith and Selsted was influential in the design of many later commercial tweeters. During the 1950s there were dozens of tweeter designs introduced. The Jensen RP-302 is another noteworthy early effort, likely designed at about the same time as the SS tweeter or slightly after. Two Jensen project engineers wrote an article on the RP-302 that was published in Audio Engineering in 1952 (I think). It was marketed as an add-on tweeter, and was also part of the Jensen G-610 Triaxial system.

  10. #10
    Steve Gonzales
    Guest

    oooo-la-la!!

    You never cease to amaze me Steve!. Thank you for a glimpse of rare and INTERESTING technology.

  11. #11
    Super Moderator yggdrasil's Avatar
    Join Date
    Dec 2004
    Location
    Våle, Norway
    Posts
    1,014
    Thanks for posting Steve. I look forward to getting some time to read the whole article carefully.
    Johnny Haugen Sørgård

  12. #12
    Senior Member
    Join Date
    Apr 2003
    Location
    Covington, Ohio
    Posts
    785
    Those would have to take the award for the rarest horn & drivers know to man and complete with documentation!

    Very nice!
    Mike Caldwell

  13. #13
    norealtalent
    Guest
    What have I been saying for a year? If they ain't Smith, they ain't horns. Thanks Steve.

  14. #14
    pelly3s
    Guest
    is anyone else thinking what im thinking..... a new lens for ring radiators

  15. #15
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,719
    Steve, you do never cease to amaze!

    Thanks for sharing.


    Widget

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. DIY 500Hz Smith Horn? Please help me design one!
    By mpaschetto in forum Lansing Product DIY Forum
    Replies: 21
    Last Post: 04-07-2008, 08:54 AM
  2. Titanium tweeters
    By Velociraptor84 in forum Lansing Product General Information
    Replies: 5
    Last Post: 11-12-2005, 06:07 AM
  3. JBL 58P60DH-01HD Tweeters
    By Sausagefingers in forum Lansing Product General Information
    Replies: 4
    Last Post: 10-24-2005, 06:22 AM
  4. Add tweeters on my JBL s3100???
    By hoto in forum Lansing Product Technical Help
    Replies: 8
    Last Post: 06-03-2004, 12:51 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •