Results 1 to 15 of 31

Thread: Market value

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member kingjames's Avatar
    Join Date
    Nov 2005
    Location
    chicago,IL
    Posts
    1,333

    Market value

    It would appear that the market on Ebay favors the Pioneer over the Marantz, the Marantz 2275 is going for a fully refurbished unit at about $400.00 and a Pioneer SX1980 that's classified as non working went for over $1000.00. I have been watching ebay closely for the SX1980 and saw 2 units in the last 2 weeks go for almost if not over $1000.00 for non working units.A fully operational SX1980 is going around $1700.00. There is a Marantz 2275 on ebay right now that has some issues and it is only at 100+ dollars with 18 hours left.We all know how big ebay is and let's face it,we may not like the prices there for JBL'S but it is a good indicator of what the market is.

    Note... Moderator can you please move this to the thread"Amplifier Decison" that is where I wanted to post and accidentally posted a new thread. Thanks Jim
    Last edited by kingjames; 01-24-2006 at 09:27 PM. Reason: inserted into wrong thread

  2. #2
    Senior Member saeman's Avatar
    Join Date
    Mar 2005
    Location
    Near Chicago
    Posts
    624

    SX-1980

    King Jim: The ebay buyers looking for big receiver power would definately prefer the SX-1980 at 270 WPC compared to 2275 rated at 75 WPC.

  3. #3
    norealtalent
    Guest
    ...and the system I could build with that $1700 would be truly amazing in comparrison...

  4. #4
    Senior Member kingjames's Avatar
    Join Date
    Nov 2005
    Location
    chicago,IL
    Posts
    1,333
    Quote Originally Posted by riessen
    King Jim: The ebay buyers looking for big receiver power would definately prefer the SX-1980 at 270 WPC compared to 2275 rated at 75 WPC.
    Riessen, maybe I'm wrong but I always thought that the more Wattage you had the clearer the sound.I remember hearing somewhere that high wattage does not necessarly mean high volume but cleaner music. What's your thoughts on this?

  5. #5
    Senior Member saeman's Avatar
    Join Date
    Mar 2005
    Location
    Near Chicago
    Posts
    624
    Quote Originally Posted by kingjames
    Riessen, maybe I'm wrong but I always thought that the more Wattage you had the clearer the sound.I remember hearing somewhere that high wattage does not necessarly mean high volume but cleaner music. What's your thoughts on this?
    I'm probably not the one to give a good answer to this. You need one of our electronics "gurus" to speak up.

    Right now I'm running the bottom end of my 4350's on 600 WPC, RMS ( a friend of mine runs his 4350's on 1000 WPC of bridged Crowns) - mostly because that's when I have and not that they require it. The result is PlEnTy of headroom. At levels I can't stand to listen too, the amps are just idling and the outputs are barely warm.

    About 20 years ago I was running a pair of my Sovereigns full tilt, listening to Sultans Of Swing as I remember. The walls were bulging and then I heard a snap and the right channel lost all the highs. I was running them on a power amp that had a rated output of 100 WPC. It was aparantly not enough power to handle the peaks. I learned from that experience that compression drivers do not like square wave. I sent the driver (LE85) into JBL and their comment was "VOICE COIL SHATTERED". They repaired it under warranty - bless their souls.

    From that day on I have always powered my speakers with amps that have plenty of headroom. How much is enough? I don't know but double the handling ability of the speakers is what I shoot for. I run a pair of L100's of a 200 WPC RMS amp and they sing. I've got a pair of electrostatics that sound like crap on less than 200.

    You need to ask some of the other guys out there who can "splain" to you in better terms.

  6. #6
    JBL Dog
    Guest
    Quote Originally Posted by riessen
    I'm probably not the one to give a good answer to this. You need one of our electronics "gurus" to speak up.

    Right now I'm running the bottom end of my 4350's on 600 WPC, RMS ( a friend of mine runs his 4350's on 1000 WPC of bridged Crowns) - mostly because that's when I have and not that they require it. The result is PlEnTy of headroom. At levels I can't stand to listen too, the amps are just idling and the outputs are barely warm.

    About 20 years ago I was running a pair of my Sovereigns full tilt, listening to Sultans Of Swing as I remember. The walls were bulging and then I heard a snap and the right channel lost all the highs. I was running them on a power amp that had a rated output of 100 WPC. It was aparantly not enough power to handle the peaks. I learned from that experience that compression drivers do not like square wave. I sent the driver (LE85) into JBL and their comment was "VOICE COIL SHATTERED". They repaired it under warranty - bless their souls.

    From that day on I have always powered my speakers with amps that have plenty of headroom. How much is enough? I don't know but double the handling ability of the speakers is what I shoot for. I run a pair of L100's of a 200 WPC RMS amp and they sing. I've got a pair of electrostatics that sound like crap on less than 200.

    You need to ask some of the other guys out there who can "splain" to you in better terms.
    After frying many-a high frequency phragm back in the early DJ days, I finally listened to the guys at Antech Labs in St. Louis and beefed up my power amps to get the headroom I needed. My general rule for power sources is to (at least) double the rated power of the speaker. I use EV S-152's for some of my small club gigs. They are rated at 200 watts continuous pink noise (whatever that means). I like to power them with a QSC PLX3420 (700 wpc @ 8 ohms). I've gotten over 1000 shows (4 hours average) from some of my S-152's without a single user-caused problem.

    You can never have too much headroom. You speaker components will thank you for it. (Are we still on topic??).

  7. #7
    Senior Member Audiobeer's Avatar
    Join Date
    Apr 2003
    Location
    St. Peters, Mo just west of St. Louis.
    Posts
    2,407
    If you wanted a fair comparison Marantz Vs Pioneer compare the marantz 2500 to the Pioneer SX-1980. Both of these were the top recievers. If you wanted to compare a Marantz 2275 your rival with Pioneer would be the Pioneer SX 850 or SX-950. Marantz and Pioneer head to head? I like the sound of Pioneer yet the Marantz always wins in price and collectibility.......that is before the operation was moved from california to Japan.

  8. #8
    JBL Dog
    Guest
    Quote Originally Posted by kingjames
    It would appear that the market on Ebay favors the Pioneer over the Marantz, the Marantz 2275 is going for a fully refurbished unit at about $400.00 and a Pioneer SX1980 that's classified as non working went for over $1000.00. I have been watching ebay closely for the SX1980 and saw 2 units in the last 2 weeks go for almost if not over $1000.00 for non working units.A fully operational SX1980 is going around $1700.00. There is a Marantz 2275 on ebay right now that has some issues and it is only at 100+ dollars with 18 hours left.We all know how big ebay is and let's face it,we may not like the prices there for JBL'S but it is a good indicator of what the market is.

    Note... Moderator can you please move this to the thread"Amplifier Decison" that is where I wanted to post and accidentally posted a new thread. Thanks Jim
    Jim:



    Correct me if I'm wrong, but isn't a Marantz 2275 a 75 watt per-channel receiver and a Pioneer SX1980 270 watts per-channel? Not sure if that's a fair comparison??

  9. #9
    Senior Member kingjames's Avatar
    Join Date
    Nov 2005
    Location
    chicago,IL
    Posts
    1,333
    Quote Originally Posted by JBL Dog
    Jim:


    Correct me if I'm wrong, but isn't a Marantz 2275 a 75 watt per-channel receiver and a Pioneer SX1980 270 watts per-channel? Not sure if that's a fair comparison??
    I am not speaking of wattage here, once you start blasting speakers to their extreme distortion is no longer an issue. I am talking about vintage receivers and what they sound like period.You can not compare these two receivers power wise because there is no comparison, however I was talking about clean sound,receiver_vs_ receiver at a moderate volume level.Is a Marantz cleaner sound than a Pioneer? The market doesn't think so.

  10. #10
    zevic
    Guest

    LOL Off topic

    Hi I am just trying to talk to dj dog just askin lol did u get my message. if u didnt check your private mesages.

  11. #11
    zevic
    Guest

    lol kingjames i know you are lookin at this thread did u get my mesage?

    didja get my message if you know plz help lol thanks!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. L100 and 43XX Monitor Legacy
    By Don McRitchie in forum Lansing Product General Information
    Replies: 8
    Last Post: 05-22-2012, 08:09 AM
  2. L166 Market Value
    By Jakeisuseless in forum Lansing Product General Information
    Replies: 1
    Last Post: 10-30-2005, 03:05 PM
  3. Market Place Issues
    By Mr. Widget in forum Forum Feedback
    Replies: 1
    Last Post: 07-21-2005, 12:19 PM
  4. Why the market demand for LE15 woofers?
    By JRL in forum Lansing Product General Information
    Replies: 5
    Last Post: 05-05-2005, 08:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •