Hi,
I have A7 (416-8B, 802-8D/511, N501-8A). Recently I purhcased 288-16G/300Hz horn and N500F Crossover with transformer attached.
Question:
Do I use the N501-8A for the 416-8B and N500F for the 288 and connect them in parallel
OR
Same connection for 288, but use the transformer in the N500F for the 416-8B
I wish to know whether the transformer will degrade the sound. If I only use the N500F, it will be easier to drive at 16 ohms. But if i use N501 and N500F in parallel, the effective impedance is about 5-6 ohms which is a more difficult load.
All comments are appreciated. Thanks.