+ Reply to Thread
Results 1 to 3 of 3

Thread: Stevens Tru-Sonic 103LX - 32 Ohms

  1. #1
    Junior Member
    Join Date
    Dec 2005
    Posts
    4

    Stevens Tru-Sonic 103LX - 32 Ohms

    I had the good fortune to find a pair of Tru-sonic woofers in an old theater last week. They appeared to be from the original installation and I was able to personally remove them.
    I have found some historical imformation on these drivers, but have not been able to locate any information about the performance of them. They were mounted in Altec VOT enclosures and I am guessing they may be similar to a Altec 515.

    I was wondering if they were a good fit for a new speaker project for the house. (I have a pair of Altec 311 horns with no home) Anybody here worked with these speakers before? Do they need to be horn loaded? What type of low frequency response are they capable of?

    Thanks for your suggestions,
    Jeff









  2. #2
    RIP 2010 scott fitlin's Avatar
    Join Date
    Apr 2003
    Location
    Brooklyn NY
    Posts
    4,657
    WOW, those are immaculate. Great find, Stephens are supposed to be very good sounding speakers.

    Steve Schell will be the one to tell you exactly what you have there.
    scottyj

  3. #3
    Junior Member
    Join Date
    Dec 2005
    Posts
    4
    Thanks Scott.

    I posted the same question on the Klipsch forum and they verified that they were used in some of the early K-horns. It has been so long since I heard any of those I can not honestly remember how the low freqency sounded.

    Jeff

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Altec 802-D 16 ohms to 8 ohms
    By beto in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 10-03-2005, 06:41 AM
  2. Specification of Lancer 44
    By mda3313 in forum Lansing Product Technical Help
    Replies: 16
    Last Post: 06-19-2005, 07:37 AM
  3. Crossover for LE 15A and 15B
    By banker80 in forum Lansing Product Technical Help
    Replies: 11
    Last Post: 05-08-2004, 05:59 PM
  4. Modeling networks
    By jim henderson in forum Lansing Product Technical Help
    Replies: 12
    Last Post: 10-23-2003, 01:11 PM
  5. LE 15a Specs
    By Dave G in forum Lansing Product Technical Help
    Replies: 3
    Last Post: 04-21-2003, 06:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts