Results 1 to 9 of 9

Thread: Attention: L90 (L7) owners. Need assist.

  1. #1
    Junior Member
    Join Date
    Oct 2005
    Location
    Denmark
    Posts
    4

    Attention: L90 (L7) owners. Need assist.

    I have recently purchased two jbl 12" drivers (LE120H-1) that I believe are used in the L90 (and maybe L7). I bought these because they supposedly work well in a smallish cabinet. I have some tentative T/S parameters, but what I would really like are the cabinet and port dimensions of the L90. That way I can start by duplicating the cabs and the port tuning. I know the L90 has internals, but with heavy internal bracing I think it would amount to about the same volume.

    Are there any L90 owners out there? If not, I think the L7 should work.

    vH pH

  2. #2
    paragon
    Guest

    Yes

    Yes, here is,
    Wait, tomorrow i will post dimensions and port.
    L 90 is going down till 40 Hz and sound is awefull.

  3. #3
    Junior Member
    Join Date
    Oct 2005
    Location
    Denmark
    Posts
    4
    Thank you, Paragon. I will be testing these as subs, so I will only be needing the bottom octave(s). 40 Hz is fine for my room.

    How would you describe the bass in the L90's?

    vH pH

  4. #4
    paragon
    Guest

    Bass?

    "Dry" and punchy ! . The best you can get.

  5. #5
    Senior Member
    Join Date
    Feb 2004
    Location
    Central Coast California
    Posts
    9,042

    Smile LE120H-1 in Fosgate Audionics THX sub

    I have two Fosgate Audionics CSS200 THX subs, and they have LE120H-1 drivers in them. These are passive units that weigh over 80 pounds. I've thought about adding plate amps to them, but that would take them up to near 100 pounds, and I already have plentry of extra amps to use externally.

    The seven L7s I have all have the LE120H-1 driver as well, and in that side-firing enclosure, they are very articulate and powerful. They work best in pairs, properly positioned to reinforce each other a la the owner's manual.
    Out.

  6. #6
    Junior Member
    Join Date
    Oct 2005
    Location
    Denmark
    Posts
    4
    OK, Paragon (and others). I found the box measurements in another thread (by Paragon) WxHxD 400x600x340 mm. Now I just need the port dimensions

    vH pH

  7. #7
    paragon
    Guest

    Ports

    Sorry, forgotten,

    Will measure it tomorrow morning and post it.

    Eckhard

  8. #8
    paragon
    Guest

    L90 Port

    Sorry, but now :

    Is about 4" dia (with a "soft" opening) and 7.1 " long (10cm x 18cm long).

    Eckhard

  9. #9
    Junior Member
    Join Date
    Oct 2005
    Location
    Denmark
    Posts
    4
    Quote Originally Posted by paragon
    Sorry, but now :

    Is about 4" dia (with a "soft" opening) and 7.1 " long (10cm x 18cm long).

    Eckhard
    OK, thanks. That is actually a great help, because it seems longer than I figured initially.

    I will report back when the things are built.

    vH pH

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. studio monitor owners manuals
    By dblaxter in forum Lansing Product Technical Help
    Replies: 7
    Last Post: 11-14-2005, 03:00 PM
  2. L25/S109 Owners Manual
    By soundmotor in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 09-20-2005, 07:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •