Results 1 to 4 of 4

Thread: Proper Baffle Configuration

  1. #1
    Senior Member jbl4ever's Avatar
    Join Date
    Dec 2005
    Location
    McHenry IL
    Posts
    366

    Proper Baffle Configuration

    I have 8 Le15A's I would like to use in a 4 way system. 4 per cabinet,size not to important. Like 24 to 30 cu.ft per enclosure. Midbass will be 2202 or 2220. I dont know if JBL quad array would be good as the biamp frequency between 200-300 Hz. Probably more like 200hz with the 2220 dont think the 2202 will keep up with them. Was thinking a 2 by 3 pattern. Your thoughts will be helpful. Thanks

  2. #2
    slxrti
    Guest
    Quote Originally Posted by jbl4ever
    I have 8 Le15A's I would like to use in a 4 way system. 4 per cabinet,size not to important. Like 24 to 30 cu.ft per enclosure. Midbass will be 2202 or 2220. I dont know if JBL quad array would be good as the biamp frequency between 200-300 Hz. Probably more like 200hz with the 2220 dont think the 2202 will keep up with them. Was thinking a 2 by 3 pattern. Your thoughts will be helpful. Thanks
    May I ask where will this be installed?


    slxrti

  3. #3
    Senior Member
    Join Date
    Apr 2003
    Location
    Australia
    Posts
    7,942
    Go check out Drew's clues.

    You will need to play with it a bit a see what integrates best.

    The problem will be that unless the LE15's are loaded in the end's of their individual enclosures or somehow stacked tight they will so spread out you will end up with all sorts of coupling and lobe issues that you will need to cross them over much lower.

    Something like a 4350 inverted with a second set of woofers atop might be interesting.

  4. #4
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    8,170
    Why not use the diamond quad confuguration JBL uses on the large cinema boxes. If it works for 2226's as long as the box size is still manageable it may not hurt to look into the box. See if they have polar or DI plots to see what you can get away with. Mike Baker had a pair you may want to PM him.

    http://www.audioheritage.org/photopo...cat=500&page=3

    Those cabinets are huge. Those are a pair of 3115's up top.

    Rob

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Field Coils -- how to find proper operating point?
    By farleybob in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 09-21-2005, 10:30 AM
  2. 2397 baffle
    By jim henderson in forum Lansing Product Technical Help
    Replies: 23
    Last Post: 03-11-2005, 02:08 PM
  3. Need advice on removing top baffle on 4343's
    By porschedpm in forum Lansing Product Technical Help
    Replies: 7
    Last Post: 02-14-2005, 03:06 PM
  4. Cutting Baffle Board
    By majick47 in forum Lansing Product Technical Help
    Replies: 17
    Last Post: 11-01-2004, 11:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •