Results 1 to 4 of 4

Thread: A Center Speaker

  1. #1
    Member
    Join Date
    Nov 2003
    Location
    New Zealand
    Posts
    55

    A Center Speaker

    The design criteria for this centre were



    JBL Bits as available

    Not a MTM

    High efficiency

    Same basic tonal qualities as L & R

    Full range speaker

    It should also double as a stand for the TV and this set the physical dimensions of the front.



    So it was it was down to the workshop and this is what I came up with.



    The pictures are pretty awful it looks better in real life.
    Attached Images Attached Images    

  2. #2
    Member
    Join Date
    Nov 2003
    Location
    New Zealand
    Posts
    55
    The dual 15” are 2205’s re-coned as 2235’s

    As they are less than ½ a wave length apart at the crossover of 300Hz they have useful mutual coupling and a reasonable bottom end so we can run the speaker as “Large”

    The 2012 puts us in the high efficiency category at 100 dB at 1 watt at 1 meter (still mucking about with equalisation for this)

    The 2435HPL Beryllium diaphragm 1.5” compression drivers are mounted on conical wave guides by DDS and are basically flat up to 10Khz where we passively crossover to some slots

    The whole thing is tri-amped with some custom made 24 dB/octave active crossovers.

    If I was doing it again I would buy a bigger TV and use a 12’ 2202 driver instead of a 10”

    A 15” and a horn was my first choice but it would have made the TV to high.





    I notice with this speaker that it defiantly sounds better having a “large” (as in full range) centre speaker, I have never been happy with the idea of picking of the bass for a surround system subwoofer as there is never a independent level control to integrate the surround system subs correctly into a speaker designated as “small”

    The Low frequency effects (LFE) channel should be left for just that in my opinion.



    Any way it sounds great with movies and adds to my enjoyment of movies and it’s not a horizontal MTM.

  3. #3
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Destiny
    Posts
    7,717
    Hey looks great!!! I am an advocate for a beefy center as well. So are those you left and rights in the picture???

    Rob

  4. #4
    Senior Member
    Join Date
    Jul 2003
    Location
    Orange County, CA
    Posts
    2,743
    GMTA!

    This one also uses a 2205 reconed as a 2235. The cabinet is chambered and includes a W15GTI serving as a sub.



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Leslie, speaker inventor, dies at 93
    By Steve in forum General Audio Discussion
    Replies: 5
    Last Post: 06-12-2009, 04:18 AM
  2. L65 Jubal as center speaker for 4333?
    By kevf in forum Lansing Product General Information
    Replies: 2
    Last Post: 09-09-2005, 04:49 AM
  3. My rant about classic speaker "upgrades" (aka hack-ups, IMHO)...
    By GordonW in forum General Audio Discussion
    Replies: 12
    Last Post: 08-27-2003, 12:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •