Results 1 to 3 of 3

Thread: A7/2245 (x2?)

  1. #1
    Senior Member
    Join Date
    Sep 2005
    Location
    Arkansas
    Posts
    784

    A7/2245 (x2?)

    Hi, All!

    I'm converting a pair of A7s (825) for active 4-way use. I have 515-8GHPs for the sealed-off horns, which will 4th-order XO around 120Hz. I've read most of the threads on adding a 2245 in the bottom, and was headed that way, but now I've got 4-2245s, and was just wondering........

    Anyone have comments or suggestions on the possibility of putting 2-2245s in an A7 bottom?

    Anybody have a single setup with a "if I had to do it over" story?

    Brad

  2. #2
    Senior Member louped garouv's Avatar
    Join Date
    Jun 2004
    Location
    formerly "the city where imagination takes precedence over fact"
    Posts
    2,152
    why not double 18" scoops below the A7s?

  3. #3
    Senior Member
    Join Date
    Sep 2005
    Location
    Arkansas
    Posts
    784
    I'm considering that, and could flip the A7s and put the High-mid and HF drivers in the unused old reflex area, instead of on top of the A7s, but don't really want the highs that far off the floor, unless the bins were limited to <24" high. I guess I'm mainly wondering if there's a satisfactory way to use 2-2245s in the cab volume recommended for one. (+/- 8 cu. ft.)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •