Hello,
Can anyone tell me if the horn and lens 2410/2301 are an equivalent to the 175 DLH ?. Can i use these drivers with the LE 14 A and LX 10 X-overs ? I have the intention to copy a Lancer 101.
Jan Slagman
Hello,
Can anyone tell me if the horn and lens 2410/2301 are an equivalent to the 175 DLH ?. Can i use these drivers with the LE 14 A and LX 10 X-overs ? I have the intention to copy a Lancer 101.
Jan Slagman
The 2410 is the LE175. The horn I'm not 100% certain of. Others may know.
Ron
I can't remember if it was the 2301 or 2305. I want to say the 2301 was a later version. I think subwoof knows for sure.
***
This is all I could find:
http://audioheritage.org/vbulletin/s...ead.php?t=1919
2410/2305 is the same as 175DLH....I just checked my 1976 JBL Pro catalogOriginally Posted by jan_slagman
Edgewound...JBL Pro Authorized...since 1988
Upland Loudspeaker Service, Upland, CA
The 1290-1217 ( pretty sure that's the number ) was used for BOTH the 1" masher variants. I actually had one of each a few years ago.
That horn was often mated with the 175 driver but there WAS a variant of the black magnet alnico types that had phenolic diaphrams.
The 2305 had a removable mounting flange and was slightly longer than the 2301 whose flange was integral.
LE175 = 2410
LE100S = 2460 ( there might of been a 175HP but I'm not sure )
LE85 = 2420
LE85HP = 2470*
375 = 2440
375HP = 2480
*Note the 2461/2470/2482 had an aluminum voicecoil while the older ones were copper
sub
ps I have a set of LE10A and PR10 with NOS jbl cone kits installed....need any
Tanks all of you for helping me out ! I really appreciate your input !
Jan Slagman
The Netherlands.
I would use this above 1500 Hz only.
Short ?---- What's the difference??... I have a set of 2421a...
Will
There are currently 1 users browsing this thread. (0 members and 1 guests)