Results 1 to 7 of 7

Thread: Switch Type Codes

  1. #1
    RIP 2014 Ken Pachkowsky's Avatar
    Join Date
    Apr 2003
    Location
    Baja, Mexico
    Posts
    1,696

    Switch Type Codes

    Can one of you guru's tell me the difference between the following toggle designations

    SPDT and SPST

    I know the SP is single pole but what is the difference between DT and ST?

    Thanks

  2. #2
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    9,963
    DT is "Double Throw." They have a center position, typically "Off," but there's other options....


    ST is "Single Throw."

  3. #3
    RIP 2014 Ken Pachkowsky's Avatar
    Join Date
    Apr 2003
    Location
    Baja, Mexico
    Posts
    1,696
    Thanks a bunch Zilch. They will work then.

    Ken

  4. #4
    ralphs99
    Guest
    Hi Ken,

    The Zilchster is basically correct except that a xPST switch will not have a centre off position. One position will complete the circuit and the other position will be open-circuit. Because an open circuit requires no terminals or contacts in the switch, it becomes cheaper to manufacture an xPST rather than a xPDT. An xPDT switch can always be wired as xPST.

    xPDT switches are the ones with the option of a centre-off position. ie closed- circuit 1, (optional centre-off), closed circuit 2.
    Centre-off has no meaning for an xPST switch.

    Cheers,
    Ralph.

  5. #5
    Senior Member
    Join Date
    Apr 2003
    Location
    Australia
    Posts
    7,942
    Quote Originally Posted by ralphs99
    Hi Ken,

    The Zilchster is basically correct except that a xPST switch will not have a centre off position. One position will complete the circuit and the other position will be open-circuit. Because an open circuit requires no terminals or contacts in the switch, it becomes cheaper to manufacture an xPST rather than a xPDT. An xPDT switch can always be wired as xPST.

    xPDT switches are the ones with the option of a centre-off position. ie closed- circuit 1, (optional centre-off), closed circuit 2.
    Centre-off has no meaning for an xPST switch.

    Cheers,
    Ralph.
    Correct

  6. #6
    Senior Member Rudy Kleimann's Avatar
    Join Date
    Jul 2005
    Location
    Houston, Texas
    Posts
    372

    Some do, some don't

    SPST, SPDT, DPST, DPDT TPDT,
    None of these designations imply a center-off position. Rather, the poles are referring to the number of circuits in the switch, and the throw refers to the number of output options, if you will, for each circuit.

    Additional information on the switch will reveal a center-off position, a momentary contact (non-locking) switch, push-pull, push-on push-off, etc.

  7. #7
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    9,963
    Yup, that's right. It's whether or not the second contacts are there. Forget the "center off" thing, which is only one form. Think double-throw relay, for example....

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. type of finish on L112's
    By mab_001 in forum Lansing Product General Information
    Replies: 0
    Last Post: 09-03-2005, 05:37 AM
  2. L-Pad vs. Toggle Switch
    By vifa32144 in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 04-22-2005, 07:54 PM
  3. LE14A magnet type
    By Donald in forum Lansing Product Technical Help
    Replies: 29
    Last Post: 11-08-2004, 11:17 AM
  4. What type of transducer?
    By neriks in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 08-08-2003, 09:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •