I have played with the program and can calculate ports and box sizes ok. My Question has to do with the right side of the graph. I noticed the line is always flat as it goes off to the right, no matter what I do to the box or ports. I use K110’s for midrange in a three way set up, and want to check their section of the enclosure. I have to run the k110s up close to their frequency limit, as the tweeters are 2405’s. I want to get that part of the enclosure right. Is the program only calculating bass frequencies, or are K110's simply very adaptable?
I built these enclosures when I was in high school, (class of '81) using a JBL enclosure guide. It has long since disapeared, and I've evidence that way back then I was not always inclined to follow directions! I'm disasembleing them and repainting to increase DAF- Daugter Acceptance Factor. Why, when wife said 'do whatever you want' did I then open my big yap?
I will also need the info to build the center chanel enclosure, which will also hold a K110 and a 2405.
Thanks,
SD
Someday I'll build a four way set, with real wood cabinets and 18's. Mmmmm 18's.