Results 1 to 3 of 3

Thread: Another crossover question (DSC280)

  1. #1
    Member Izzy Weird's Avatar
    Join Date
    Dec 2005
    Location
    Redmond, WA, USA
    Posts
    63

    Another crossover question (DSC280)

    Hello,

    I have one of these waiting to be installed on the next major overhaul. I've been using an Ashley XR88/12 for about 20 years.

    Or I could buy the two BSS units required to do stereo 4-way, and sell the DSC280.

    Has anyone had experience with the DSC280? Any opinions on the sound quality in comparison with others?

    Thanks in advance,

    Izzy

  2. #2
    Senior Moment Member Oldmics's Avatar
    Join Date
    Apr 2003
    Location
    Between Venus and Mars
    Posts
    872

    I Gotta Pile of Them

    They are the same as the BSS 388 without the temp probe option.So it will do stereo 4 way.

    Open it up and you will see the BSS logo on the PC cards.

    It sounds better than Shures digital stuff,better than the Protea"s (Ashly),better than the DBX drive muck,better than JBLs 260 or ANY of Beringer"s crap,not quite as good as the BSS omnidrives and noware near the quality of XTA or Lake Contour.

    If you already have it-I would use it.

    Oldmics

  3. #3
    Member Izzy Weird's Avatar
    Join Date
    Dec 2005
    Location
    Redmond, WA, USA
    Posts
    63
    Hello Oldmics,

    Thanks for the advice. I was hoping someone here had used them.

    I got this one from a sale at JBL, at about half price. I sort of figured the new Omnidrive BSS units would be superior, but was not sure if it was worth the extra bucks it would take to get them.

    Thanks again,
    Izzy

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Crossover Network Capacitor Values Question
    By maabx in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 10-04-2005, 03:57 PM
  2. JBL 3110 crossover question and aftermarket diaphragm report
    By molecularman in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 04-24-2005, 07:51 AM
  3. Neophyte crossover question
    By FredEmmerich in forum Lansing Product General Information
    Replies: 4
    Last Post: 03-19-2005, 10:31 AM
  4. Crossover and driver question
    By Reconer in forum Lansing Product Technical Help
    Replies: 3
    Last Post: 01-12-2004, 02:05 PM
  5. L25/L26 Crossover question
    By cary in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 07-08-2003, 11:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •