I am running a 2ways set up xith LE15A and LE85, I am using a old crossover from a L200b for this. I kow that the L-PADs on these Xovers are starting to fail and also guess that most of the condos would benefit from replacing.
So, I decided to rebuild a copy of these using fresh, good quality components. I have one problem, I cannot find 16 ohms Lpads as specified by JBL, only 8ohms (see crossover schematics attached).
Could someone confirm my calculations (this is really not my stuff) that replacing the Lpads for 8 ohms, I should just change the resistance labelled 13203 from 5 to 7.5 ohms and everything should be OK?
Also, what is your opinion on the usefulness of keeping the LCR cell on the HF channel considering I only use a flea-power amplifier to run these, what would happen if I ommit these parts?
Reply With Quote