I'm trying to make by myself the cards (52.5130) for my 4430
I'm not sure about which kind of cap and resistor I must use.
Any suggestion ? I would use the "better sounding" components
Of course I need also info on where to buy these components
I'm trying to make by myself the cards (52.5130) for my 4430
I'm not sure about which kind of cap and resistor I must use.
Any suggestion ? I would use the "better sounding" components
Of course I need also info on where to buy these components
It's in the manual.
http://www.jblproservice.com/pdf/Vin...5%20manual.pdf
Rob
I will have a look at what you need and if I have them I will send them to you. Just cover the postage and make a 10.00 donation to the site.Originally Posted by mvaldes
Sound fair?
Also send your address in a PM.
Ken
Hi
Couple of odd values in the caps so I will send you a link to Mouser or Allied with all the part numbers you need. Give me 24 hours though, as I have a busy evening and day tomorrow.
Ken
Hi Ken
it sounds great.
I'll wait for your info
PS. donation is not a problem. I'll be pleased to do something for this site that provided me a lot of help
Michele
I will look up the part numbers and post them here.
Ken
Hi Ken,
have you find the parts or the parts number ?
can't wait to test my new toy
Sorry, let me do, it right now.Originally Posted by mvaldes
Ken
Get these at www.mouser.com
Enjoy
JBL 52-5130
C1 0.039uf R1 11K
C2 0.082uf R2 11K
C3 0.0013uf R3 11K
C4 0.01uf R4 13K
C5 Jump R5 Empty
C6 Jump R6 Empty
140-PF2A393F X2 = .039
140-PF2A823F X2 =.082
140-PF2A122F X2 =.0012 (SUB FOR .0013)
140-PF2A102F X2 =.01
Dale ¼ watt 1% resistors
71-CCF55-11K X6 = 11K resistors
71-CCF55-13K X2 = 13K resistors
There you go
Thank you very much Ken
I've just made the order to mouser.
Just one more question. I'm also seeking for the connector that had to be mounted on the PCB of the 52.5130 card. I can't find in the moser catalog. Maybe I'm not serching right
Have any suggestion ?
A little confused here. Did you make your own PCB's? If not, where are the connectors that were on the cards?Originally Posted by mvaldes
Do you need the male or female?
I am going by memory here but the male is on the main board and the female on the filter boards?
If you have to find connectors for the filter boards. I thing we can figure something out.
Ken
Ken, You've got a pm.
Robin
yes, I'm making a new PCB
I've bought the xover with the cards for 500hz cutting . These boards have different PCB layout from the 52.5130
Now I'm making two new PCB in order to make the 52.5130 cards by myself
I don't want to take out the connector from old card, so I need to find some new ones
The one that I need is the female, since male in on MB
I thought you already know a part number for this connector too
Sorry if I make you getting confused. Probably I didn't explained well what I was going to do
Molex 0.156" PCB Connector, 6 pins.
Mouser #538-09-52-3063
Look right?
yes, this is the one I need
Thank very much
There are currently 1 users browsing this thread. (0 members and 1 guests)