Hi,

Anybody knows whether the N501-8A is a first order design? I have added a tweeter JBL 2405 and want do a bandpass for the mid horn so that I can use the 2405 from about 8 khz onwards. I will be tapping the signal from the mid horn terminals, which means the 2405 already has a capacitor in series from the N501.

I'm using a crossover calculator to calculate a 3 way, but noticed the capacitor value also changes for the mid as I vary the crossover freq for the 2405. Does that mean that, besides the inductor, I have to add capacitors in series to change the resultant value (i.e the cap in the N501 + additional cap) to that shown by the calculator.

Thanks.