Use of 035Ti Tweeters to Replace Le-25 Le-25-2 or Le 25-4's

[lgvenable]

Doesn't the TDS give the 035Ti as a replacement or upgarde for the LE tweeter series to be the 035Ti in the 4312A, L100 Century (late Model)?

Just want to verify

[Don C]

Doesn't the TDS give the 035Ti as a replacement or upgarde for the LE tweeter series to be the 035Ti in the 4312A, L100 Century (late Model)?

Just want to verify

Yes, but it's actually showing 035TiA on the sheet that I have. It's on the early model sheet too, replacing LE20-1. I have been wondering if they would update the sheet to show 052Ti if they were making updates today.

[lgvenable]

the difference between the 035 ti and 035tiA is ??

I'm guessing neglible, as I eventually want to upgrade all 5 set of speakers to 035Ti's or better, so a pristine set of 035Ti's would be a good investment, since reconing a single Le-25 is on the order of 79.00.

L

[Steelyfan]

the difference between the 035 ti and 035tiA is ??

I'm guessing neglible, as I eventually want to upgrade all 5 set of speakers to 035Ti's or better, so a pristine set of 035Ti's would be a good investment, since reconing a single Le-25 is on the order of 79.00.

L

Hello LGVenable, concerning replacing the LE25 with Ti's :

the JBL tech sheet for the L36 says : "use only as a last resort"
and "replace both units in a stereo pair"

[Robh3606]

You need to modify the networks. If you look at the 4312A is uses a 12db as opposed to a 6db network. Add a .2uh coil across the tweeter before the L-Pad.


Rob

[Don C]

Here's an older thread discussing the tweeter differences, there are even plots.
http://www.audioheritage.org/vbullet...ead.php?t=4272