Results 1 to 5 of 5

Thread: L100 Century woofer question

  1. #1
    Junior Member
    Join Date
    Sep 2005
    Location
    Toronto, Canada
    Posts
    3

    L100 Century woofer question

    I have a decent set of L100's but alas, one woofer is blown! The model # of the woofer is 123A-3. I have been looking for a replacement driver but the ones that I have seen on Ebay are model # 123A-1, and they look different then my original woofer. Do these two models have different specs, or are the changes just cosmetic (my 123A-3 has no no visible screws on the backside, nor the red plastic cap - however the front of the speaker looks identical)?

    Thanks for any info you can provide.

    Barry

  2. #2
    Senior Member
    Join Date
    Apr 2003
    Location
    GTA, Ont.
    Posts
    5,109
    I have been looking for a replacement driver but the ones that I have seen on Ebay are model # 123A-1, and they look different then my original woofer.
    - There's a 123A-3 on eBay right now . # 5820444167 .
    - These seem to come up at least once every two months.

    - Stick with what was put in your box. The new versus old variant likely equtes to a different BL figure caused by a different voice coil .


  3. #3
    Junior Member
    Join Date
    Sep 2005
    Location
    Toronto, Canada
    Posts
    3
    Thanks for the tip Earl!!

    B.

  4. #4
    Senior Member Rusnzha's Avatar
    Join Date
    Aug 2003
    Location
    Wichita, KS
    Posts
    456
    I changed the -1s in my L100s to -3s. They have the same personality, but the -3 has a bit more capacity in the low end. Definitely hold out for a -3.

  5. #5
    Member
    Join Date
    Oct 2005
    Location
    Copenhagen, Denmark.
    Posts
    55
    Hi ther

    You can also try to contact simplyspeakers.com and hear what they say.
    I have just looked at their web, and they asg $250..
    Good luck

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. L100 Grille Peg question
    By kworrilow in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 06-20-2014, 02:41 PM
  2. L100 and 43XX Monitor Legacy
    By Don McRitchie in forum Lansing Product General Information
    Replies: 8
    Last Post: 05-22-2012, 08:09 AM
  3. Damaged grill pegs on L100 Century cabinet
    By Royd in forum Lansing Product Technical Help
    Replies: 10
    Last Post: 09-27-2005, 07:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •