Results 1 to 5 of 5

Thread: Advice on refoaming L220

  1. #1
    Junior Member Latsa's Avatar
    Join Date
    Jun 2005
    Location
    Belgium
    Posts
    9

    Advice on refoaming L220

    I just bought a pair of L220 in a very good condition
    The first owner did not use the speakers for the last 10 years !!
    I have to replace the foams. As it is not very easy to get JBL spare parts here in Belgium, i will try to find some replacement kit on the net. Do you know if those they sell on speakerepair.com are correct ?

    A picture of my new babies :


  2. #2
    Senior Member Lancer's Avatar
    Join Date
    Jun 2005
    Posts
    473
    Quote Originally Posted by Latsa
    A picture of my new babies :
    Very Nice!

  3. #3
    Junior Member Latsa's Avatar
    Join Date
    Jun 2005
    Location
    Belgium
    Posts
    9
    Thanks !

    They look even better since i oiled them

    I would like to take a look at the Le5-9 but i have no idea how to remove the refracting lens

  4. #4
    Junior Member
    Join Date
    Apr 2005
    Location
    Franklin Wi
    Posts
    9
    You remove the midrange from the rear on an L220. Remove the back panel to expose the crossover an then you can get to the mountings of the midrange speakers. Good luck speakers look nice

  5. #5
    Junior Member
    Join Date
    Apr 2005
    Location
    Franklin Wi
    Posts
    9
    For refoaming kits try rick Cobb [email protected] he sells a complete kit with foam for driver an PR with instructions and CD

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. 250Ti Advice sought
    By Audiokarma in forum Lansing Product General Information
    Replies: 33
    Last Post: 05-17-2005, 08:35 PM
  2. Would like buying advice for L220
    By Steve K in forum Lansing Product General Information
    Replies: 4
    Last Post: 04-10-2005, 06:13 AM
  3. Weighing in on a few issues, L220 and B460
    By pmakres1 in forum Lansing Product General Information
    Replies: 18
    Last Post: 03-18-2005, 11:44 AM
  4. Need advice on removing top baffle on 4343's
    By porschedpm in forum Lansing Product Technical Help
    Replies: 7
    Last Post: 02-14-2005, 03:06 PM
  5. Be aware of this when refoaming old speakers
    By Flodstroem in forum Lansing Product Technical Help
    Replies: 9
    Last Post: 09-13-2004, 05:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •