Results 1 to 4 of 4

Thread: Everest crossover with 2402 and 2440 on a 2380A Horn

  1. #1
    MatthiasA
    Guest

    Everest crossover with 2402 and 2440 on a 2380A Horn

    Hello!

    the parts for the everest crossover are not too expensive

    iam searching for a while a crossover for my 2402 8 ohms High Driver
    and for my 2440 mounted on a 2380A 16 ohms Horn Midrange Driver

    orginal the 2405 16 ohm (high) and the 2425H 8 ohm (mid ) are used in the
    everest crossover schematics

    what parts must i change due to the differently impedance of the drivers ?

    the crossover frequence of 850 hz / 7500 is great ! this is what i need!

    2 E-140 woofers are in the subsection

    greetings Matthias

  2. #2
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    9,963
    Again, all of the 240x drivers are the same impedance, whether they say 8 or 16 Ohms.

    Your 2440, you'll put a 16-Ohm resistor in parallel with it and lose 3 dB of output, or change the diaphragm to 8-Ohm version.

    Gettin' that tapped inductor is not a problem?

  3. #3
    Senior Member Guido's Avatar
    Join Date
    Apr 2003
    Location
    Germany
    Posts
    2,503
    Matthias,

    the 2440 and 2425 are completely different animals!

    They ae NOT interchangeable. The difference in impedance is the smaller problem. The difference in response is the bigger one.
    To implement the 2440 in the everest design is pro work!!

  4. #4
    MatthiasA
    Guest
    have anybody schematics of an x over for the 2440 ?
    850 to 7500 hz ? it is a 16 ohm driver


    Greetings Matthias

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. List of JBL info
    By Donald in forum Lansing Product General Information
    Replies: 3
    Last Post: 10-27-2004, 04:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •