Results 1 to 12 of 12

Thread: DATA on JBL 240TI ?

  1. #1
    Junior Member
    Join Date
    Jul 2005
    Location
    Denmark
    Posts
    29

    DATA on JBL 240TI ?

    Hi.
    Could someone please tell me where to find some data
    on the JBL 240TI ? I tried the search link and I tried the
    internet , but did not find anything I could use.
    It`s because I can by a set from the newspaper , but I cant
    here them , speakers will be sent by mail.

    Thanks for all help , I need it !

    Hitachi

  2. #2
    Senior Member Don C's Avatar
    Join Date
    Apr 2003
    Location
    Santa Rosa CA
    Posts
    1,722
    Very good speakers. Three way with 14 inch woofer.
    Did you see the catalog page in the library?
    http://www.lansingheritage.org/image...-ti/page07.jpg

  3. #3

  4. #4
    Junior Member
    Join Date
    Jul 2005
    Location
    Denmark
    Posts
    29
    Me again.


    Is JBL 240TI a better speaker than JBL 4412 ?
    I only can afford 1 set.
    Should play music in my livingroom.
    I have Yamaha CX2 & MX-2 2 x150 watt RMS.
    Like rock and blues.

    Fritz

  5. #5
    Senior Member Don C's Avatar
    Join Date
    Apr 2003
    Location
    Santa Rosa CA
    Posts
    1,722
    Yes, 240Ti should be better than the 4412. The bigger woofer should go a bit lower, and the metal frame 044ti tweeter is supposed to be a bit better than the plastic 035. It's not a fair comparison, the 240s are floor standing systems, while the 4412 is bookshelf size.

  6. #6
    Junior Member
    Join Date
    Jul 2005
    Location
    Denmark
    Posts
    29
    Ok.


    Then I buy the 240TI. GOOD looking speakers !
    But still I miss a list of data on the 240TI..U knoww 30-20.000 +- 3 Db
    and so on.
    I am very very glad , that there is a forum like this on the internet.
    Good forum and helpfull people in here !

    Fritz

  7. #7
    Junior Member
    Join Date
    Jul 2005
    Location
    Denmark
    Posts
    29
    Hi guys..

    I am blind !! I found it...
    Thanks a lot for all your help to a newbee.
    I am VERY thankfull.
    Thanks.

    Best Regard from Denmark

    Fritz

  8. #8
    Junior Member
    Join Date
    Jul 2005
    Location
    Denmark
    Posts
    29
    Hi again.

    Last one. Is JBL 240TI a hard time for the amplifier ?
    How about impedance ? Could u tell me where to find some curves
    of impedance / frequence ? That was easy to find for the 4412 in PRO section.
    But none in section JBL of the 240TI,,

    Fritz

  9. #9
    Senior Member Don C's Avatar
    Join Date
    Apr 2003
    Location
    Santa Rosa CA
    Posts
    1,722
    This system is pretty much a 250 Ti without the mid bass speaker. So the impedance shouldn't be much different, maybe you can look for 250Ti information. 240Ti did not sell for a long period of time, and there was no pro equivalent, so information is harder to find.

  10. #10
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    9,963
    Please learn to navigate the site using the "Search" function.

    http://audioheritage.org/vbulletin/s...5578#post65578

  11. #11
    Senior Member porschedpm's Avatar
    Join Date
    May 2004
    Location
    Reno/SF Bay Area
    Posts
    483

    4412 vs 240Ti

    I have both a pair of 4412 and a pair of 240Ti. I much prefer the 240Ti's in every respect. Much more accurate and extended bass. Better midrange and better, crisper highs. That's not to say the 4412 is any slouch. It is considered one of the best monitors in its size class. As mentioned above, though, the 240Ti is a much larger speaker than the 4412, so placement could be an issue. I'm currently driving the 240Ti's with a 15w/ch tubed integrated amp without any problems so I don't think the 240Ti's are a difficult load to drive. If I could only pick one, and size/placement was not an issue, I would definitely go with the 240Ti.

  12. #12
    Senior Member Michael Smith's Avatar
    Join Date
    Mar 2005
    Location
    Melbourne, Australia
    Posts
    175

    4412 vrs 240ti

    It matters little,If you can't get the 4412s' to sound any good,what chance have you got going up to 240tis!
    Do the scource end first.
    Michael

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. L100 and 43XX Monitor Legacy
    By Don McRitchie in forum Lansing Product General Information
    Replies: 8
    Last Post: 05-22-2012, 08:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •