Results 1 to 3 of 3

Thread: DUAL 2204H for bass cabinet.

  1. #1
    sa660
    Guest

    Lightbulb DUAL 2204H for bass cabinet.

    My brother bought 4 stage monitors with 2204H and 2450J.
    He is very kind and offering me the 4 2204H.
    Can you please help me advice and the best solution to create a good base cabined for home application. I would like to get a flat response.

    Option1.
    Single volume with 2x2204H one single vent. Crossover 1200Hz with 2" (2450) or 1" (LE85).

    Option2.
    Dual volume with 2x2204H, one single vent. Crossover 1200Hz with 2" (2450) or 1" (LE85).

    Option3.
    dual Volume with 2x2204, one single vent. Crossover below 100Hz for one driver Crossover 1200Hz with 2" (2450) or 1" (LE85). similar to the 4435.


    Option4.
    dual Volume with 2x2204, vents. Crossover below 100Hz for one driver Crossover 1200Hz with 2" (2450) or 1" (LE85). similar to the 4435.

    I would like to know if you could recommend volume and vent size for these configurations.

    Thanks,

  2. #2
    Senior Seņor boputnam's Avatar
    Join Date
    Apr 2003
    Location
    northern california
    Posts
    6,142
    Here's the Thiele Small paramters for the 2204H from here: JBLPro Thiele Small Parameters Link and, you can design your own boxes around these bad boys using some of the info and modelling approach available here (see #115, right-hand menu band): Basic Car Audio Electronics Link

    There's tonnes of useful stuff there, and you can donate to support the cause!

    (NB: that VAS is in Liters. ft3 = L*0.03532)
    Attached Images Attached Images  
    Last edited by boputnam; 08-28-2003 at 09:34 AM.
    bo

    "Indeed, not!!"

  3. #3
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193

    Re: DUAL 2204H for bass cabinet.

    Hello SA660,

    The JBL recommended enclosure for the 2204H is 2.0 cubic feet tuned to 40 Hz.

    Bass Box 6 Pro recommends 1.5 cubic feet tuned to 48 Hz for "Hi Fidelity" and 2.8 cubic feet tuned to 41 Hz for "Extended Bass".

    In any case I would suggest you give each 2204H it's own volume/port/duct.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. HELP DIY L250TI XOVER & CABINET
    By gerard in forum Lansing Product DIY Forum
    Replies: 8
    Last Post: 12-01-2004, 03:31 AM
  2. Dual 18 studio monitor?
    By glen in forum Lansing Product General Information
    Replies: 4
    Last Post: 11-17-2004, 11:21 AM
  3. Is it worth it to rebuild an old JBL cabinet...?
    By fjhuerta in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 03-22-2004, 10:36 AM
  4. new jbl cabinet
    By jorrit bierma in forum Lansing Product General Information
    Replies: 1
    Last Post: 07-06-2003, 02:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •