Hi everybody,
does anybody have the schematic of the card for the 4355, crossover 290 Hz/ 18dB?
I ask for a friend.
Thanks and regards
Dieter
Hi everybody,
does anybody have the schematic of the card for the 4355, crossover 290 Hz/ 18dB?
I ask for a friend.
Thanks and regards
Dieter
Last edited by Dieter; 08-25-2003 at 11:15 AM.
Daphile; MUSETEC AUDIO (L.K.S. Audio) MH-DA005 - USB; Accuphase E-460; Everest DD66000
51-5145
51-5130
52-5120
Thank you,
i think, that's what my friend needs!!
Regards
Dieter
Daphile; MUSETEC AUDIO (L.K.S. Audio) MH-DA005 - USB; Accuphase E-460; Everest DD66000
You're welcome
Hi Giskard,
i have a new question:
in the manual for the 5235
http://www.jblproservice.com/pdf/Vin...5%20manual.pdf
Jbl wrote that for the 51-5145 card R1 is 5,2 k ohm.
In your post you have a copy where R1 is 6.2 k Ohm.
What is right?
Or i am wrong?
Please help me and my friend.
Best regards
Dieter
Daphile; MUSETEC AUDIO (L.K.S. Audio) MH-DA005 - USB; Accuphase E-460; Everest DD66000
Good eye Dieter!
Here you go:
Looks to me like the 5234A manual is right and the 5235 manual is wrong.
Looks to me like the 5234A manual is right and the 5235 manual is wrong.
Yea, looks like a typo. Besides the curve (thanks, Giskard!), all the 18db/Octave cards have R1, R2, and R3 of same value, both in the 5234A manual (5234A Manual - Link) and in the 5235, except for that 290 Hz card.
Another typo for the record books.
bo
"Indeed, not!!"
"all the 18db/Octave cards have R1, R2, and R3 of same value"
Yeah, except when you're building the 4430/4435 card which also uses the 18dB/octave card.
There are currently 1 users browsing this thread. (0 members and 1 guests)