Greetings all...
The saga continues with my Lancer/Athena 99 debacle. I've decided to hold off on doing anything with the rattling left-side LE-14a driver, as it seems to be behaving better with more use.
And so, last night I decided to pull the other LE-14a and rotate it to its correct position. While I had the driver out, I decided to pull the aluminum cover plate off the LX-4 xover. Curiouser and curiouser. What I saw was not really that surprising, a couple of paper caps and a couple of xformers, with something else living behind these items which I could not see too clearly.
So, after all this drivel, on to the question... could these benefit from a re-cap?
Thanks,
-Alan