Results 1 to 4 of 4

Thread: LE-25 Repair

  1. #1
    Senior Member lgvenable's Avatar
    Join Date
    Apr 2005
    Location
    Broken Arrow OK
    Posts
    553

    LE-25 Repair

    A quick search did not show any repairs made to LE-25's.

    Has anyone on the forum repaired the wires on an LE-25?

    One of mine broke a connection wire just where it enters the spider wall. The dust cone is dented; is it possible to cut it open, then carefully solder & wire to the broke wire connection, then glue a dust cap back on. The tech at Simply Speakers said thats what they do. I didn't know if anyone has done it.
    They'll replace everyhting for 79.00, however it'd be nice to use a little thin wire, solder, and a 2.00 dust cap.
    larry
    Integra DHC80.1,3x 4636LF, 2360-2446J 2404H,12 x 8340 Surrounds, 2 x4645B, BGW 250D's,250E's,& 750B's 16 amps...7600 watts

  2. #2
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    9,963
    There's one thread here where it's been successfully accomplished, yes.

    You're riskin' two bucks to try it, tho....

  3. #3
    Senior Member lgvenable's Avatar
    Join Date
    Apr 2005
    Location
    Broken Arrow OK
    Posts
    553

    which thread??

    words like
    tweeter, repair
    LE-25, repair
    re-lead
    repair, lead
    doesnlt return any results?? Do remember the thread author??
    Thanks
    larry
    Integra DHC80.1,3x 4636LF, 2360-2446J 2404H,12 x 8340 Surrounds, 2 x4645B, BGW 250D's,250E's,& 750B's 16 amps...7600 watts

  4. #4
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    9,963
    Don't remember, alas. They were replacing the foam on the face of an LE25 and inadvertently broke the wire. Soldered it, worked fine.

    Carefully scrape the enamel off (Xacto knife?) to solder.

    I can't find it either....

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Keyboard Repair
    By Reconer in forum General Audio Discussion
    Replies: 5
    Last Post: 12-01-2004, 03:22 PM
  2. Cube Repair Needed
    By analogman in forum Lansing Product Technical Help
    Replies: 0
    Last Post: 10-23-2004, 01:17 PM
  3. Repair
    By rvito in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 03-14-2004, 08:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •