Results 1 to 6 of 6

Thread: JBL DX-1 Crossover kits

  1. #1
    Senior Member pasadena's Avatar
    Join Date
    Apr 2003
    Location
    Australia
    Posts
    217

    JBL DX-1 Crossover kits

    I have ordered a pair of JBL DX-1 crossover kits for a pair of JBL XPL-200 speakers I have sourced to buy.

    I belieive the DX-1 crossover kits comes with input and ouput cards made for particular speakers and if you changed your speakers you could get cards to match.

    I want to know if I can still get these cards for the XPL-200 speakers, otherwise where I can get blank cards as I can source a schematic diagram to build up a card specific for the XPL-200's?

    I know that JBL used to have blpan cards but were supposedly all bought up by DTS Labs. A former engineer from JBL has moved over to DTS Labs so I'm wondering what use does DTS Labs have with these cards?

    Any inofrmation would be very useful.

    Cheers
    Mark

  2. #2
    Webmaster Don McRitchie's Avatar
    Join Date
    Apr 2003
    Location
    Winnipeg, Canada
    Posts
    1,753
    I'm wondering what use does DTS Labs have with these cards?
    Here's a hint:







    These pictures were all taken at the DTS headquarters. DTS is nearly an all JBL installation for their screening room and listening rooms as illustrated above. My guess is that the 4425MKII's in the theatre may be the primary use.
    Regards

    Don McRitchie

  3. #3
    Senior Member pasadena's Avatar
    Join Date
    Apr 2003
    Location
    Australia
    Posts
    217
    Originally posted by Don McRitchie
    Here's a hint:

    These pictures were all taken at the DTS headquarters. DTS is nearly an all JBL installation for their screening room and listening rooms as illustrated above. My guess is that the 4425MKII's in the theatre may be the primary use.
    Don,

    Thanks for your reply.

    Huh, no wonder.......If DTS Labs use JBL equipment in their home theatre setup, Just shows how good JBL stuff is!!! and what can be achieved in a home setup

    So what hope is there to obtain these input/output cards for the DX-1 crossover kits from JBL or anyone for that fact?

    Surely, JBL must still be have these in stock collecting dust somewhere or at least make them? Can JBL provide you with diagrams for having these cards custom made?

    You would think that if the JBL DX-1 crossover kits are still obtainable from JBL today, that would assume you can also get the cards for them, is this true and could you find out for me if possible Don? And, will JBL provide you with schematics to custom make certain cards for a certain speaker if you happen to get a hold of a blank/used input/output card?

    Thanks for your help and the interesting pics?

  4. #4
    Webmaster Don McRitchie's Avatar
    Join Date
    Apr 2003
    Location
    Winnipeg, Canada
    Posts
    1,753
    I'm afraid there is no one at JBL I could call to check the availability. My contacts are all in engineering and they have no knowledge of current JBL inventory.

    My limited knowledge of the DX-1 is that it was developed for the XPL200 and hasn't been manufactured since. Somehow a few remained in inventory as recently as last year. However, it would appear that DTS has since cleaned them out. I doubt if they still had cards around or if they would make the schematics available.
    Regards

    Don McRitchie

  5. #5
    Senior Member pasadena's Avatar
    Join Date
    Apr 2003
    Location
    Australia
    Posts
    217
    Don,

    The DX-1's JBL currently have in stock (which I purchased) are the same ones you're talking about that were available as of late last year or are they just still available but with only a few left?

    Mark

  6. #6
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    8,170
    Here is a schematic. Don't know if it is good for the XPL200'S
    Attached Images Attached Images

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. JBL crossover / impedance interaction
    By Tom Loizeaux in forum Lansing Product Technical Help
    Replies: 12
    Last Post: 11-21-2005, 12:35 PM
  2. JBl XPL 160 and active crossover
    By glarre in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 10-18-2004, 08:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •