Results 1 to 6 of 6

Thread: The LE5 Matrix

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Techbot's Avatar
    Join Date
    Aug 2004
    Location
    Lansing Heritage
    Posts
    681

    The LE5 Matrix

    As requested:
    Attached Images Attached Images  

  2. #2
    Senior Member Techbot's Avatar
    Join Date
    Aug 2004
    Location
    Lansing Heritage
    Posts
    681
    The following information is courtesy of JBL -

    NOTES:

    The Alnico LE5-2 and LE5-3

    For reasons not very well understood, there are two versions of the LE5-2, the round wire version and the ribbon wire version. Just knowing the model number doesn't help. Later versions of the LE5-2 were round wire only and the LE5-3 became the ribbon wire version. The Alnico motors had a .080 gap height and a flux density of 1.65 T.

    The Ferrites

    The ferrite motors had a .140 gap height and a flux density of 1.35 T.

    General

    All the LE5's used the same cone and spider. Dust domes were either paper or aluminum. The voice coils were either ribbon or round and all of them had a .125 voice coil height. The odd model numbers used the ribbon voice coil, were more efficient and had a more level curve good to ~ 8 to 10 kHz. The even model numbers used the round voice coil, had more of a rising response and were good to ~ 16 kHz.

  3. #3
    Senior Member Techbot's Avatar
    Join Date
    Aug 2004
    Location
    Lansing Heritage
    Posts
    681

    LE5-6, LE5-8, LE5-10, LE5-12

    Even model numbers
    Attached Images Attached Images   

  4. #4
    Senior Member Techbot's Avatar
    Join Date
    Aug 2004
    Location
    Lansing Heritage
    Posts
    681

    LE5-5, LE5-9, LE5-11

    Odd model numbers
    Attached Images Attached Images   

  5. #5
    Senior Member Techbot's Avatar
    Join Date
    Aug 2004
    Location
    Lansing Heritage
    Posts
    681

    104H

    .
    Attached Images Attached Images    

  6. #6
    Senior Member Techbot's Avatar
    Join Date
    Aug 2004
    Location
    Lansing Heritage
    Posts
    681

    104H-2 and 104H-3

    ..
    Attached Images Attached Images    

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. LE5 Midrange driver question
    By kworrilow in forum Lansing Product Technical Help
    Replies: 12
    Last Post: 12-20-2006, 10:35 AM
  2. LE5 Versions?
    By johnaec in forum Lansing Product Technical Help
    Replies: 18
    Last Post: 04-28-2005, 06:29 PM
  3. Sub enclosure Mdf , Cardboard ? Pvc ?
    By gerard in forum Lansing Product DIY Forum
    Replies: 18
    Last Post: 03-28-2005, 10:54 AM
  4. Various LE5 models
    By Donald in forum Lansing Product Technical Help
    Replies: 9
    Last Post: 06-26-2004, 06:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •