Bolting on 125A's?

[New At This]

I've just done a resurround to the 125A woofers on a pair of Decade 36's. Unfortunately, when I got them, the woofers were out and ready for repair, and the bolts that bolt them to the boxes were gone.

Does anyone know what size(s)/kind(s) of bolts or screws that would work here I could ask for at the hardware store?

Thanks.

[edgewound]

The tee nuts in the baffle are 10/32 machine screw threads. The stock screws are a phillips/fillister head machine screw, about 1.5" long or so.


Edgewound

[New At This]

Thanks, Edgewound...

[GordonW]

Interestingly enough, the same size screws that fit rack-mount rails also fit JBL T-nuts. Somehow, I'm betting that's not totally coincidental.

Though, as EW mentioned, you'll need the fillister head, for the screw head to be small enough to fit properly into the recesses in the speaker frame...

Regards,
Gordon.

[LE15-Thumper]

I've just done a resurround to the 125A woofers on a pair of Decade 36's. Unfortunately, when I got them, the woofers were out and ready for repair, and the bolts that bolt them to the boxes were gone.

Does anyone know what size(s)/kind(s) of bolts or screws that would work here I could ask for at the hardware store?

Thanks.

http://www.smithfast.com/trussrndfill.html#fillister

Learn something new everyday