Results 1 to 7 of 7

Thread: Re-coning 2213 woofers?

  1. #1
    Jefrado
    Guest

    Re-coning 2213 woofers?

    Has anyone attempted this and if so, how difficult is it. I have a pair of 4311B's that I've owned since 1983 and one of my woofer ate it!
    Thanks-

  2. #2
    Super Moderator yggdrasil's Avatar
    Join Date
    Dec 2004
    Location
    Våle, Norway
    Posts
    1,014
    You will find many posts regarding both reconing and refoaming. Try a search...
    Johnny Haugen Sørgård

  3. #3
    hector.murray
    Guest

    Instructions

    The resurround guide has alot of info on it that is directly applicable to you. It can be found here:
    http://www.audioheritage.org/vbullet...d+step-by-step

    A 2213 is nearly identical to a 123 or a 2212, the differance being the spider mount is larger in diameter on a 2213. A 123 recone can be seen here:

    http://www.audioheritage.org/vbullet...ght=123+recone

    Read the resurround guide first though.
    Good luck and welcome to the forums!

  4. #4
    Senior Member
    Join Date
    Feb 2004
    Location
    Land of Sunshine
    Posts
    423
    Looking at the second link, am i right to say that the 2213/123 can only be recone and not just replacing the surround? I noticed the surround is not make of foam.

    Thanks.

  5. #5
    Senior Member GordonW's Avatar
    Join Date
    May 2003
    Location
    Marietta/Moultrie GA USA
    Posts
    1,455
    I've re-surrounded 2213Hs and 123As before... it's not a simple job (you have to first find the correct fabric surround, install it, and then coat the new surround with appropriate damping "goop"), but it can be done quite effectively, as long as the cone and voice coil are intact.

    I can do this job for anyone who wants to send me the driver; depending on parts and such, it'd run between about $45 and $50...

    Regards,
    Gordon.

  6. #6
    Senior Member
    Join Date
    Feb 2004
    Location
    Land of Sunshine
    Posts
    423
    Thanks Gordon, will bear that in mind when the need arises.

    BTW, cool webpage you have there.

  7. #7
    hector.murray
    Guest

    2213h

    Gordon is the bomb when it comes to 2213Hs

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 123A-3 and the 2213
    By BTW in forum Lansing Product General Information
    Replies: 7
    Last Post: 01-04-2004, 06:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •