One of the 2231A's in my 4343's is now popping at higher DB levels. Already has had a cone repair.
I love the top end of the 4343. Rather than a full recone on the 2231, any recomendations on a better low end replacement [on both]? Currently bi-amped with a Crown on the bottom, McIntosh [SS] on top. Cost is dependant on what I can get away with...
For what it would cost you to get a 2235 cone in there about $120 that is the only way to go that makes sense. You certainly are not going to get a better driver or one that will intergrate properly for less than a recone on the 2231.
Rob
And if cost was no object?
Then build a pair of biased 4345's.
Even building the 4345's your not going to get a significant change in bandwidth down low. More power handling and higher SPLs but that's it. And of course you have to build a new set of cabinets.
Rob
The 4345 gives a bit more authority in the bass.
ian
What, then, would be a more modern replacement for the 2231?
Before you do anything drastic, have you tried rotating the woofer 180 degrees?
David
it would sure look funny with the magnet sticking out the front of the cabinet
-grumpy
Oh! That 180 degrees!
2235HOriginally Posted by Triumph Don
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
