Several members here have had great success using a steam iron to lift scratches and indentations from the veneer. My problem is a little more severe.

One of my speakers has a chip on the middle of one side by the back edge. It is about 1.5" wide across the edge and goes in about 0.75" from the back edge. The veneer is gone. The depth tapers from about 3/32" at the edge to the thickness of the veneer.

About the only scheme I can think of is to fill the depression with wood filler, sand it perfectly flat and put an entirely new sheet of thin walnut veneer over the entire side.

Any other ideas?

Thanks,
John Lovda