Results 1 to 4 of 4

Thread: Use of M553 (3-way crossover) as 2-way?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    GarMan
    Guest

    Use of M553 (3-way crossover) as 2-way?

    Can the M553 3-way crossover be used in a 2-way system by setting the low/mid and mid/high to the same frequency and only using the low and high outputs?

    Out of curiosity, what happens to the midrange when the low/mid frequency is set higher than the mid/high frequency?

    thanks,
    Gar.

  2. #2
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    8,170
    Yes

    Set the first section up as divide by 10. Button on the back and set first frequency dial up at 180Hz. What you now have is an 18Hz high pass. So the first output is sub 18Hz. Take the low range from the Mid output and use the tweeter as the high. Set the other control to the frequency required. When you engage the divide by 10 button make sure the unit is off.

    Rob

  3. #3
    GarMan
    Guest
    Brilliant!

    Thank you.

  4. #4
    Senior Member caladois's Avatar
    Join Date
    Apr 2003
    Location
    FRANCE Lyon
    Posts
    335
    That's what I do to biamp my 4435. It work fine.
    regards Stephane
    Regards Stephane

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Ashly XR1001 Active Crossover
    By boputnam in forum Electronic Crossovers
    Replies: 156
    Last Post: 10-06-2009, 09:58 AM
  2. Questions about the Ashly XR1001 Active Crossover
    By porschedpm in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 12-19-2004, 02:37 PM
  3. Newbie here! Need your collective wisdom on a proper crossover...
    By David Dryden in forum Lansing Product General Information
    Replies: 12
    Last Post: 02-29-2004, 05:10 PM
  4. How do you determine axis tilt at crossover??
    By Robh3606 in forum Lansing Product DIY Forum
    Replies: 0
    Last Post: 09-03-2003, 09:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •