Brought the quasi finished boxes downstairs for testing/tweaking and thought I should take a few pictures of progress so far. These are 2205 reconed as a 2225, 2425 with 2370 and 2404. The crossovers are 3110 and 3105.
When a working 3110 is thrown in the mix these guys really are nice. So here it is so far. Next steps - kick plate for bottom, trim each box for each speaker, grille work and tweak the networks (after getting another working 3110)
http://audioheritage.csdco.com/vbull...tid=5839&stc=1
http://audioheritage.csdco.com/vbull...tid=5840&stc=1
In this next picture of the side you can envision making the horn section as a seperate box on top of a box - add a recessed kick plate on the bottom.
http://audioheritage.csdco.com/vbull...tid=5838&stc=1
These next two are simply of the back of the top section for each speaker - the first with working networks to show how the connections will happen and the second which shows where I dismantled the networks (got the 3105 to work - 3110 worked enough to verify it was basicaly shot with ceramics chipped and a melting pot of mush in the bottom)
http://audioheritage.csdco.com/vbull...tid=5837&stc=1
http://audioheritage.csdco.com/vbull...tid=5836&stc=1
I'll update again when closer to finished.
Reply With Quote