Do yopu have any expériences using the analogic controler model C-236A ?
In fact I possed a M553ex to biamp my 4435 modified. I like to know if I had any interest in buying this unit (for a good value !!!) ?
regards Stephane
Do yopu have any expériences using the analogic controler model C-236A ?
In fact I possed a M553ex to biamp my 4435 modified. I like to know if I had any interest in buying this unit (for a good value !!!) ?
regards Stephane
Regards Stephane
An M552, 2 way stereo would be easier than the 3 way M553, unless You are running xtra tweeters and plan to tri-amp.
] An M552, 2 way stereo would be easier than the 3 way M553, unless You are running xtra tweeters and plan to tri-amp.
I use my m553ex as a two way at the moment.My system is going to change in that way :
1bass JBL E145 (Amcron DC300 a2 amplifier)
2Low médium JBL 2450 + VITAVOX 15 cell horn (Amcron DC300 a2 amplifier)
3 High meduim and tweeter : JBL 2450 +2397 Horn and JBL 2403 (UREI 6230 amplifier)
M553 or C236a ? What do you recommand for an active 3 way?
Regards Stephane
Regards Stephane
That's now a week since the C236a is on It appears to be more musical than the m553. Better 3d image More silence
Regards Stephane
I have been using the M553 for years in my system (E145/2123/2420+2344A). But I have modified it by removing all coupling caps. This improved the sound enormously. And you should not trust the potmeters, nowadays I calibrate the M553 using my oscilloscope so left and right channels are adjusted equally.
I am in the process now of building a shunt power supply for the M553 to further improve its sound. It is still the worst component in my setup, but I cannot do without it, and with carefull use, you can get a great sound from it.
The JBL C236 power supply seems to be more elaborate/
Regards Stephane
There are currently 1 users browsing this thread. (0 members and 1 guests)