View Poll Results: port position

Voters
10. You may not vote on this poll
  • closer to the floor

    6 60.00%
  • higher up

    4 40.00%
Multiple Choice Poll.
Results 1 to 12 of 12

Thread: port position

  1. #1
    Alex Lancaster
    Guest

    Question port position

    I am building a system more or less after the 4350/5's, but with 4 2245" woofers in 1400L enclosures per pair; What are the pros and cons of having the ports closer to the floor or higher up?

    Thanks

  2. #2
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    14,548
    1400 liters per pair of 2245H's?
    Why so big?
    What is the target tuning frequency?

  3. #3
    Alex Lancaster
    Guest
    I know the size is overkill, I want to get 22Hz.

    Alex

  4. #4
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    14,548
    Well you can do as you wish obviously but that's a whole bunch of volume and it will take an enormous amount of bracing to get the system losses down to an acceptable level.

    Maybe you would prefer to place each 2245H in a decent B4 alignment and then give yourself the option to add an external 20 Hz second order high pass filter with a Q of 2 which effectively turns the system into a B6 alignment. The 3 dB downpoint will be roughly 20 Hz.

    In other words, you build an enclosure of roughly 10 cubic feet per transducer (280 liters) and tune the box to 28 Hz. This is roughly a B4 alignment (4th order Butterworth). To turn it into a B6 alignment (6th order Butterworth) you simply retune the enclosure to 20 Hz and apply a 20 Hz high pass filter with Q = 2. This extends the VLF by roughly 10 to 15 Hz. We used to build the enclosure and then use two duct/port configurations. One port/duct would tune the volume to 28 Hz and the other port/duct would tune the same volume to 20 Hz. We would cover whichever port wasn't in use.

    If you want further information on what I am talking about look up "A New Set of Sixth-Order Vented-Box Loudspeaker System Alignments" by D.B. Keele Jr. - Journal of the Audio Engineering Society June 1975, Volume 23, Number 5.

    He and R.J. Newman worked on this concept while at Electro-Voice. Electro-Voice was a veritable powerhouse of talent during this time period with Keele, Newman, J.N. White and others on staff.

    Incidentally, the JBL 5234A and 5235 electronic frequency dividing networks have the second order high pass options (Q = 2) built in. To use just the boost option, leave the unity gain cards in and run full range.

  5. #5
    Alex Lancaster
    Guest
    Giskard:

    Thanks a lot, I will look it up; for the enclosure You suggested, what port diameters and length should I use?

    I already have a good M553 X-over, What can I do to it?

    Thanks.

  6. #6
    Senior Seņor boputnam's Avatar
    Join Date
    Apr 2003
    Location
    northern california
    Posts
    7,007
    Giskard...

    Incidentally, the JBL 5234A and 5235 electronic frequency dividing networks have the second order high pass options (Q = 2) built in. To use just the boost option, leave the unity gain cards in and run full range
    Should us 4345 caretakers be listening in? Per my post to Ken P sometime back, I'm aware of the option, and I'm always pleased with the results of implementing your "advice" (if this is that, or are you merely speaking fact...?), but personally cannot imagine the need for anything other than "factory flat".

    I'm inclined to defer any EQ modifications until I get the transducers back in spec - it would seem to be games on an unlevel playing field. The 2122H's are done, but the 2245H's are in serious need, and I expect marvelous things on their resurround.

    But, this is an easy enough test...
    bo

    "Indeed, not!!"

  7. #7
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    14,548
    Alex:

    "for the enclosure You suggested, what port diameters and length should I use?"

    For each 2245H use a 10 cubic foot volume with two 6" diameter ports each having a 12.5" duct. To extend the VLF simply block off one of the ports and add a 20 Hz second order high pass filter with a Q of 2.

    The M553 doesn't have any VLF boost functionality that I know of. You would have to build your own to place between the M553 output and the VLF amp or simply put a 5234A or 5235 in the chain with the 20 Hz boost switched on and the unity gain cards in place. With the unity gain cards in place you are not using the dividing network functionality of the 5234A/5235.

    Bo:

    "Should us 4345 caretakers be listening in?"

    No
    Last edited by 4313B; 07-16-2003 at 08:15 PM.

  8. #8
    Alex Lancaster
    Guest

    Smile

    Bo:

    Thanks again!, will do, and save some lumber and space.

    To the original question, Where would You put the ports, up or down?

    I will build it with the 2202H, 2445 and 2405H in a separate cabinet so I can endo the 2245H's and put the ports up or down, How about in the middle?

    Alex

  9. #9
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    14,548
    "To the original question, Where would You put the ports, up or down?"

    Depends on what kind of boundary reinforcement you're after. The further away from the floor you mount the driver/port(s) the less reinforcement you will get. Remember that a 2245H doesn't really like a whole bunch of boundary reinforcement when mounted in a vented-box of 8 to 10 cubic feet tuned to 28 to 30 Hz. A 2242H mounted in the same enclosure DOES prefer a bit of boundary reinforcement.

  10. #10
    Senior Member GordonW's Avatar
    Join Date
    May 2003
    Location
    Marietta/Moultrie GA USA
    Posts
    1,457
    ... but with a 2245, you should be able to just tune it a bit lower (say 25-26 Hz), and then use a low-mounted port to utilize boundary reinforcement, right? (ie, trade off a little output at 30-40 Hz (which the boundary should restore), for a little in the 25-30 Hz range... )

    Regards,
    Gordon.

  11. #11
    Alex Lancaster
    Guest
    Guys:

    Thanks a lot for Your advice, I will be putting it on the forum in about a month and let You know.

  12. #12
    Niklas Nord
    Guest
    Have you built your subs yet?
    I´m very interested in how the
    play, if they turned up to be great.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2245 port sizes
    By dennis j leisz in forum Lansing Product Technical Help
    Replies: 30
    Last Post: 01-28-2007, 02:40 AM
  2. Cabinet size vs. port displacement
    By johnaec in forum Lansing Product Technical Help
    Replies: 12
    Last Post: 08-15-2005, 07:33 PM
  3. Port tube availability ?
    By buzzmarr in forum Lansing Product Technical Help
    Replies: 14
    Last Post: 12-30-2004, 12:46 PM
  4. port sizes for 2242 ?
    By Tom Loizeaux in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 09-10-2004, 02:34 PM
  5. Port size change.
    By vifa32144 in forum Lansing Product Technical Help
    Replies: 9
    Last Post: 03-15-2004, 08:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •