Page 1 of 3 123 LastLast
Results 1 to 15 of 31

Thread: Hey, I'm Famous!!!

  1. #1
    Webmaster Don McRitchie's Avatar
    Join Date
    Apr 2003
    Location
    Winnipeg, Canada
    Posts
    1,753

    Hey, I'm Famous!!!

    My definition of "Kabuki Speaker" that I gave on the AK forum has been lifted as an entry into the Web's "Urban Dictionary" here:

    http://www.urbandictionary.com/defin...Kabuki+Speaker

    Now, if I can only get it into the Oxford English Dictionary, I'll be immortal.
    Regards

    Don McRitchie

  2. #2
    Senior Member Don C's Avatar
    Join Date
    Apr 2003
    Location
    Santa Rosa CA
    Posts
    1,722
    Congratulations! There was always a need for a term to describe those speakers, and you supplied it. It was inevitable that it would be picked up by others and used forever.

  3. #3
    Administrator Wardsweb's Avatar
    Join Date
    Apr 2003
    Location
    Texas
    Posts
    908
    Wow and to think I knew you when you were just another audio enthusiast.

  4. #4
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,720
    The Pioneer CS-99A would be one of those... they still go for more than they should, dented dust caps and all. I do have an unnatural fascination with them though. Here is a pair from a recent e-Bay auction.

    Widget
    Attached Images Attached Images  

  5. #5
    Webmaster Don McRitchie's Avatar
    Join Date
    Apr 2003
    Location
    Winnipeg, Canada
    Posts
    1,753
    Below is a veritable Kabirama. I put this collage together for a thread on AK calked "What Gear do You Hate". The centre picture illustrates the Pioneer CS-901 which was the system to which I first applied the term "Kabuki Speaker". As I said at the time, "This abomination wasn't engineered - it was speced out by the marketing department. It's just a mindless copy of every speaker cliche they could think of."

    The coaxial driver is priceless. It has the tweeter aimed at your ankles (the first ankle biter speaker ). More importantly, its design defeats the entire purpose of using a coaxial driver. Coaxials tend to be expensive to manufacture, but the cost is offset with the benefit of superior imaging from having all drivers acting as a single point source. This is completely defeated when you add a discrete midrange horn and phyiscally separate it from the bass/HF drivers.

    If you look carefully, you'll see that the multicell is not even an actual horn/driver. It's a small aluminum tweeter cone over which they have plunked a plastic multicell. The tweeter is just glued to the pole piece as evidenced by the fact that they had to run the tweeter leads through the bass cone to reach the driver.

    Below is link to an article that explains the "engineering" behind such systems.

    http://decware.com/paper10.htm
    Attached Images Attached Images  
    Regards

    Don McRitchie

  6. #6
    Senior Member LE15-Thumper's Avatar
    Join Date
    Feb 2004
    Location
    Winnipeg, Canada
    Posts
    602
    Quote Originally Posted by Don McRitchie
    My definition of "Kabuki Speaker" that I gave on the AK forum has been lifted as an entry into the Web's "Urban Dictionary" here:

    http://www.urbandictionary.com/defin...Kabuki+Speaker

    Now, if I can only get it into the Oxford English Dictionary, I'll be immortal.

    We're not worthy !


    LE15-Thumper
    "Give me JBL, or give me death"

  7. #7
    Senior Member duaneage's Avatar
    Join Date
    Jan 2005
    Location
    The First State
    Posts
    1,585
    My God , Don you have awakened bad memories.


    Being a GI in the 80's , most of my barracks mates had these horrible speakers, most notable were the marantz uglies on the lower right my own roomate tortured me with. Some even had LED power meters on them. One day a poor guy asked me to fix one for him, had a popped capacitor that opened up the midrange circuit. Discovered that not only were the SUPERTWEETERS not even connected, but the magnet on the woofer was smaller than the one used in my control1 monitor. The absolute worse had to be the time aligned junque Technics sold with the disk tweeters and midranges. Ugh!

  8. #8
    Junior Member
    Join Date
    Nov 2010
    Location
    myrtle beach
    Posts
    1

    Cool Congrats!

    I'm so glad I got educated on these! I saw an ad on craigslist for a pair of Sansui SP-X 9700 speakers for $50, and I talked him down to $40, thinking I would have a wonderful pair of vintage speakers. After all, I had noticed that the last pair of these had sold on eBay for $465! So I thought - what the heck? I'll take a chance on $40...

    They were in excellent condition, so I hooked them up to a vintage HK receiver of mine, and...... well - let's just say I was underwhelmed.... Kabuki music is a perfect description. The little 2-way bookshelf speakers I normally use, with the 5 inch drivers, sounded better.

    So I said - time to put 'em on ebay and make a buck out of these! Mine didn't reach $465 for some reason, though they were in the same or better condition. However, they did reach $203, so I made a tidy profit on them. Broke even on shipping...

  9. #9
    Senior Member jcrobso's Avatar
    Join Date
    Oct 2008
    Location
    Chicago
    Posts
    1,099

    A friend of mine had a pair of Kabbuki Pioneer Speakers.

    He knew they didn't sound the best but he like the look of them.
    I replaced all the speakers with a 3 way Beyma system and they sounded sooo much better.

  10. #10
    Senior Member Ducatista47's Avatar
    Join Date
    Jul 2005
    Location
    Peoria, Illinois
    Posts
    1,886
    From that Decware paper:

    Inspect the speakers... see any plastic?.... walk away.

    So walk away from a lot of Harman/JBL offerings of recent years. How the mighty have fallen.

    Don't the LSR series of monitors and the EOS waveguides have plastic elements?
    Information is not Knowledge; Knowledge is not Wisdom
    Too many audiophiles listen with their eyes instead of their ears


  11. #11
    Senior Member
    Join Date
    Sep 2003
    Location
    nj
    Posts
    239

    No plastic on lsr

    There is no plastic on my LSR 6332's. The midrange and tweeter are mounted to a cast aluminum panel that is thick with ribs.

    AL

  12. #12
    Senior Member
    Join Date
    Jul 2006
    Location
    USA
    Posts
    197

    Perhaps he means the baffle?

    It was carbon fiber on the LSR32 and LSR28, then they changed it to ABS or some kind of bulk molding compound for the 63 series? I believe they said they did it for production purposes as the carbon fiber was too difficult to work with.

  13. #13
    Senior Member gferrell's Avatar
    Join Date
    Jan 2010
    Location
    Styx , NC
    Posts
    479
    Quote Originally Posted by Don McRitchie View Post
    My definition of "Kabuki Speaker" that I gave on the AK forum has been lifted as an entry into the Web's "Urban Dictionary" here:

    http://www.urbandictionary.com/defin...Kabuki+Speaker

    Now, if I can only get it into the Oxford English Dictionary, I'll be immortal.
    I hope you make it, if not at least I learned something from you!
    XPL 200's w DX1, XPL 160's, XPL 140's, L7's, L5's, L3's, L1's Homemade L Center, 4412's, 4406, L60T's, L20T's

  14. #14
    RIP 2021 SEAWOLF97's Avatar
    Join Date
    Jan 2006
    Location
    in "managed decline"
    Posts
    10,054
    these may qual for the prized "Kabuki" designation ?

    saw a pair today in GW ....real beauties ..

    I'm gonna let you guess the famous manufacturer
    Attached Images Attached Images  
    Some kind of happiness is measured out in miles

  15. #15
    RIP 2021 SEAWOLF97's Avatar
    Join Date
    Jan 2006
    Location
    in "managed decline"
    Posts
    10,054
    Quote Originally Posted by SEAWOLF97 View Post
    these may qual for the prized "Kabuki" designation ?

    saw a pair today in GW ....real beauties ..

    I'm gonna let you guess the famous manufacturer
    HINT: from a Harman company

    more 'bukies ??
    Attached Images Attached Images  
    Some kind of happiness is measured out in miles

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Hey ! Moderator: A Winnipeg Summit ? No pun intended
    By LE15-Thumper in forum Lansing Product General Information
    Replies: 0
    Last Post: 01-28-2005, 08:13 PM
  2. Hey! PC geeks, only $300k
    By Donald in forum General Audio Discussion
    Replies: 5
    Last Post: 11-12-2004, 06:23 PM
  3. Hey, it's not my fault!
    By PaulB in forum General Audio Discussion
    Replies: 7
    Last Post: 03-05-2004, 02:55 PM
  4. Hey guys I need help
    By BigBusa in forum Lansing Product General Information
    Replies: 2
    Last Post: 05-06-2003, 10:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •