Results 1 to 2 of 2

Thread: Lancer 77 Network Help

  1. #1
    Bamadawg63
    Guest

    Lancer 77 Network Help

    I am in the process of redoing the surrounds on a pair of Lancer 77's and I would also like to rebuld the Xover while I have everything out. I want to keep the attenuator but put the Xover components outside the current network box and mount them on Xover boards inside then just wire it to the attenuator. I would like some help on what to use when rebuilding the Xover - I know the specs on the resistors because they are marked - but after reading the spec sheets here about the specialized caps used, I could use some help on what to use in place of the orig. Mylar cap inside, and also suggestions from others that have rebuilt this network. Any help is greatly accepted.

    Cheers...
    Nate

  2. #2

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 4343 VS 4345 network?
    By tv506 in forum Lansing Product Technical Help
    Replies: 21
    Last Post: 08-17-2011, 08:12 AM
  2. 250ti jubilee network diagram
    By CLASS A in forum Lansing Product Technical Help
    Replies: 28
    Last Post: 11-04-2005, 01:42 AM
  3. Help needed from you network wizards
    By Guido in forum Lansing Product Technical Help
    Replies: 14
    Last Post: 04-07-2004, 11:45 AM
  4. adjust network between 2425 and 2405
    By delahais in forum Lansing Product Technical Help
    Replies: 0
    Last Post: 10-07-2003, 10:51 AM
  5. Bypass caps in 3103 network
    By boputnam in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 07-26-2003, 08:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •