How high can they go, 2206, 2226, 2242

[Niklas Nord]

Hi

What is the highest recomended crossover for those drivers
if used with 2" horn driver like 2446 or 2451 ?

HIFI -purpose

I can see that the distorsion is higher over 400hz, but I guess
it´s still very very low though.

My K2 s9500 use 1400nd and are crossed 650hz to the 2451,
is that very high? Would the 2226 handle this? If it does, there
would be something worth doing;

2226 with 2451 maybe is close to K2

what to you think.

would the 2242 handle frequencies up to 1000hz?

[Niklas Nord]

One more thing

Is the 2227 better on all the things the 2226 can do?
If used from 80hz and up ?

Closed box

[Robh3606]

Not sure I understand your question. All of them 2206/2226/2227 can be used with 1" drivers so figure 800Hz-1K a 2" will cross lower. The only issue you would have is how low your horn loads the compression driver. The horn's low frequency loading will set the crossover point. The 2242???? Looks like it would work to say 500Hz-800Hz for say a 2" driver but up to 1K??? I wouldn't figure 500Hz or so look's like a better place.

http://www.jblpro.com/pages/pub/components/2242.pdf

Rob

[Niklas Nord]

I wanted to know how high they can be used with an 2" driver.
Thr 2206, 2226 and 2242 ! The highest crossowerpoint that is not an
problem for the drivers..