I've about to set up the baffles and hardware, when some questions arose.
I read the 4350 notes regarding how to change Rt / Left sides of drivers in the enclosure, but am not fully satisfied I understand their geometry.
Tee-Nuts on int of Baffle, don't appear to be well anchored, if laden from the interior of the enclosure.
1) Do both the 2440 /2441 and the 2405 use gaskets between the driver and the baffle?
2) Are the tee-nuts receiving 2 bolts/machine screws , one from either side, or is it simple one bolt, and is it nutted only by the tee-nut or also behind the mounting plate?
Any help is appreciated.