Hi all.
I have searched all over, but cant find accurate info.
I have aq. a set of 4406 S.M. wich didnt play well, tweeters didnt play at all.
Tweeter wire from post to coil was corroded away, so re-soldered, and new damping foam under the cap.
did no1 and hooked it up, while doing no2. wow it played well.
When connecting no2 speaker, alle bass dissapeared.
turned out that the black and red wire from the outside cabinet, to the x-over was reversed from one another.
I did not know at that time that these older JBLīs plays "negative" wired...
So when looking at the x-over, i saw that all wires were reversed, so changed that to "normal" rules.
as on the att. pics.
Found the x-over diagram, but am puzzled, since my tweeters have the + marked in the plastic, were there is a male connnector, and on the diagram, + is marked as female...
Can someone explain the right wiring, for the x- over, and terminals on the woofer and tweeter.
Thanks for any tips. Henrik.
Reply With Quote