crossover for 4344 clon.

[manley]

Hallo

the project is now on its way, I am getting the cabinets within the next couples of months for my 4344 Clon

My drivers is so far:

JBL 2404 Ultra high
JBL 2426 High
JBL 2251J Mid (should be 1: 1 with JBL 2123/2122 after what I have been able to read up on on this forum)
JBL LE15A/2225 until I get reconed my second sets of 2225H too 2235H/2234H

so now I am trying to figure out which crossover I should use.

What I have found so far is the Biased 3144 3145 Schematic (see attach picture) crossover should be the beds option.

I have also looked at the crossover for 4343, which is somewhat a lot more simple, but it is difficult to find any information about it can be used in a 4344


So in the end I just wanted to hear your opinion before I started buying the parts, about which crossover sounds the best in your in your opinion for the 4344 clon.


BR
Manley

[Earl K]

manley,

With the components that you have on hand, you'll need to have a custom crossover designed for your project for it to work properly.

I suggest that you contact and hire Troels Gravesen ( ask if he's interested in designing for your custom project ) .

Alternately, keep collecting the right parts and then make an actual clone of a JBL 4-way. That way you can successfully utilize one of the published crossovers.

"Clone" meaning; Using the exact, specified drivers of the known design.

[grumpy]

"JBL 2251J Mid (should be 1: 1 with JBL 2123/2122 after what I have been able to read up on on this forum)"

The drivers might be less similar than expected (e.g., rising response of 2251).
Usable in the described system with a different crossover? Probably fine (agreeing with Earl).