Page 2 of 2 FirstFirst 12
Results 16 to 20 of 20

Thread: 3105, 3115 crossover questions

  1. #16
    Senior Member RMC's Avatar
    Join Date
    Feb 2017
    Location
    Canada
    Posts
    1,291
    Based on widget's insight you'll be using the 075

    So now you need to install the new capacitors you bought in place of the old ones

    i suggest you get yourself very small cone speakers like 1-2" dia. max that will go above 7khz, this to avoid using the 075 at this point with such old gear in case of malfunction that may damage the 075. These speakers can be found at electronic surplus stores for cheap.

    Test the crossovers and L-pad using the small speakers with low level music. Exercise the rotary L-Pad controls to confirm they work ok

    If testing seems to go well then you're ready for the next step with the 075 diaphragms, and hope for the best

  2. #17
    Junior Member
    Join Date
    Apr 2021
    Location
    acapulco
    Posts
    28
    Quote Originally Posted by Mr. Widget View Post
    All vintage JBL ring radiator tweeters (pre-D2) are the same whether labeled 8 ohms or 16 ohms. JBL has confused thousands of people over the years with their changing labels. The 075/2402 tweeter which is the correct tweeter for the 3105 and the 077/2405 use diaphragms of different thickness aluminum, but they are all about 10-12 ohms.

    BTW: The 077/2405 tweeters use the 3106 crossover.

    Regarding your diaphragms with different impedance ratings, if they were made by JBL, they will be either for the 075/2402 or 077/2405, but they will not offer two different impedances. Diaphragms from other sources can be of any spec, and so far no one seems to have offered an alternative diaphragm that works properly in either of these JBL ring radiators.


    Widget
    THANKS A LOt FOR YOUR ANSWER

    3105 with 075 tweeters , I have 2 diferent ohm generic diaphragms not jbl

    8 ohm = about 6 ohm at mulimeter directly to diaphragm
    16 ohm = about 11 11.5 ohm

    for the moment is the only options that I have

    which ohm is my best option ?
    thanks in advance
    Name:  WhatsApp Image 2021-08-30 at 18.48.50.jpeg
Views: 89
Size:  43.2 KB

  3. #18
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    10,997
    I wouldn't sweat the impedance... it'll be off a bit either way. I would try both and see if either one works for your application. I'll be surprised if you are able to get a final pair that are assembled and sound identical.


    Widget

  4. #19
    Senior Member Doctor_Electron's Avatar
    Join Date
    May 2003
    Location
    California Central Coast, USA
    Posts
    303

    Special Secret diaphram tweak

    I am certain that I read here about a step in the production of ring radiators that one of the experienced assemblers developed a simple adjustment, (with a pencil?) on the diaphragms that allowed them to pass the factory frequency response and/or distortion tests. Apparently without this adjustment many of the drivers did not pass. If this is true, does it need to be done when a replacement diaphragm is installed? I figured it was something that might improve the OP's results.
    "Why don't you Mine your own Bismuth, so you won't be mining mine?"

  5. #20
    Senior Member RMC's Avatar
    Join Date
    Feb 2017
    Location
    Canada
    Posts
    1,291
    I also remember reading something here to that effect not long ago. However don't remember the details anymore than you do...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Questions about JBL n7000 (3105)
    By retro soulman in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 11-15-2017, 07:20 PM
  2. N7000 and 3105 crossover networks the same?
    By postcardman33 in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 05-28-2015, 11:48 AM
  3. Opening up/refurbing a 3105 crossover
    By cooky1257 in forum Lansing Product DIY Forum
    Replies: 9
    Last Post: 01-11-2008, 05:35 PM
  4. New guy needs 3105 crossover advice, perhaps more!
    By sdaniel in forum Lansing Product Technical Help
    Replies: 6
    Last Post: 12-15-2005, 02:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •