Results 1 to 15 of 16

Thread: Fender Twin + Jbl

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member stephane RAME's Avatar
    Join Date
    Dec 2004
    Location
    Haut de seine - FRANCE
    Posts
    608

    Fender Twin + Jbl

    Fender Twin Silverface
    1980 - 135w Schema Ultralineaire
    2 Jbl D130
    Attached Images Attached Images    

  2. #2
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    9,963
    Good thing it's got wheels. Them babies HEAVY

    D130 with ferrite magnets?

    E130, no?

  3. #3
    Senior Seņor boputnam's Avatar
    Join Date
    Apr 2003
    Location
    northern california
    Posts
    6,142
    Hey, Stephane...

    Those are truly beauties. I'd love to hear it!

    Just a thought - if you're using that amp alongside any others, make sure your transducer polarity is consistent between the amps. Those JBL's are negative, and if you're connected Tip=(+) to Red, that cone will move IN on signal. Since that's a modular 1/4-in, I cannot tell of Tip is going to Red or Black connector.

    bo

    "Indeed, not!!"

  4. #4
    lfh
    Guest
    Quote Originally Posted by Zilch
    D130 with ferrite magnets?

    E130, no?


    I would even say E120.

  5. #5
    Webmaster Don McRitchie's Avatar
    Join Date
    Apr 2003
    Location
    Winnipeg, Canada
    Posts
    1,753
    They do appear to be 15's as the illustration below of an E120 shows that the magnet diameter pretty much equals the inner rim diameter of the 12" drivers. However, the camera angle is deceiving so that I am not positive. The D130 was available as a ferrite model from around 1979 to 1981 so that it is possible that they are D130h's. The second picture is an illustration of a factory labled D130h.
    Attached Images Attached Images   
    Regards

    Don McRitchie

  6. #6
    lfh
    Guest

    Still not convinced

    I'm not an expert, but AFAIK all stock twins sport a 2x12 setup (Jensen as standard, JBL as option), and at an external width in the 26 in ballpark, a much larger offset would be required to squeeze in 2x15 (if at all possible).

  7. #7
    Senior Seņor boputnam's Avatar
    Join Date
    Apr 2003
    Location
    northern california
    Posts
    6,142
    Quote Originally Posted by Don McRitchie
    However, the camera angle is deceiving...
    Yup!

    That twin came loaded with 12's - and the E120 slips right in.

    I've got one loaded into my Blues Jr. and another in the Motion Sound Pro-145.

    And yea, I cross-wired each one!
    bo

    "Indeed, not!!"

  8. #8
    Senior Member stephane RAME's Avatar
    Join Date
    Dec 2004
    Location
    Haut de seine - FRANCE
    Posts
    608
    detail
    Attached Images Attached Images  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. L100 and 43XX Monitor Legacy
    By Don McRitchie in forum Lansing Product General Information
    Replies: 8
    Last Post: 05-22-2012, 08:09 AM
  2. JBL OEM: Made by JBL for Others
    By honist_bob in forum Lansing Product General Information
    Replies: 33
    Last Post: 01-22-2010, 10:40 AM
  3. Mobile JBL almost ready...
    By johnaec in forum General Audio Discussion
    Replies: 5
    Last Post: 08-01-2004, 11:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •