Results 1 to 6 of 6

Thread: Mounting Screws for a 2241

  1. #1
    Senior Member
    Join Date
    Jul 2003
    Location
    Orange County, CA
    Posts
    3,597

    Mounting Screws for a 2241

    I'm doing some work on the Merman cabinets and noticed that builder used wood screws to hold the 2241s. I want to change these to Allen keys/Tee-nuts. What is the better fit 1/4-20 or 10-24?

    Thanks

  2. #2
    Senior Member 1audiohack's Avatar
    Join Date
    Jul 2007
    Location
    Las Vegas Nevada
    Posts
    3,092
    The 2241’s are factory retained in theater and SR enclosures with 10/32 fillister head Phillips screws which have a head diameter of 0.300”

    Barry.
    If we knew what the hell we were doing, we wouldn't call it research would we.

  3. #3
    Senior Member
    Join Date
    Jul 2003
    Location
    Orange County, CA
    Posts
    3,597
    Thanks.

    Then a couple of these should do the trick.

    https://www.parts-express.com/parts-...g-kit--260-776

  4. #4
    Senior Member
    Join Date
    Apr 2003
    Location
    GTA, Ont.
    Posts
    5,109
    FWIW,

    A few decades back I moved all my PRO stuff to 1/4-20 T-Nuts + Fillister headed bolts.

    1/4-20 stuff was simply a lot easier to find at the time.


  5. #5
    Senior Member
    Join Date
    Jul 2003
    Location
    Orange County, CA
    Posts
    3,597
    I prefer the Allen key to the Fillister head because I feel there is more opportunity/possibility to put the screwdriver (pressing down) through the surround than an Allen key (turning laterally) when tightening the screws.

  6. #6
    Senior Member
    Join Date
    Apr 2003
    Location
    Covington, Ohio
    Posts
    785
    I use 10-32 and 1/4-20 allen cap head screws on all my cabinets.

    I also use 10-32's to mount my rack equipment with.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Speaker mounting screws
    By henrikfk in forum Lansing Product Technical Help
    Replies: 0
    Last Post: 03-27-2019, 01:07 PM
  2. mounting screws for 2206h
    By mts17116 in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 01-18-2017, 01:54 PM
  3. Mounting Screws
    By JBLOG in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 03-27-2008, 09:01 AM
  4. 4343's mounting screws
    By mark_ix in forum Lansing Product Technical Help
    Replies: 3
    Last Post: 12-21-2007, 01:25 AM
  5. Black mounting screws
    By John W in forum Lansing Product DIY Forum
    Replies: 13
    Last Post: 08-29-2006, 09:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •