4333 build

[quindecima]

Due to downsizing needs I need to make a change from my 4355's that I built and am thinking 4333's would be nice. I can use the existing components from the speakers I have now but am wondering if using the cross would be effective. I have a nice cross from a well known member here and am wondering if just not hooking up the "not needed" components would work.

[Mr. Widget]

Are you asking if you can use a 3155 network in a 4333?


Widget

[quindecima]

Are you asking if you can use a 3155 network in a 4333?


Widget

actually I considered that but only for a short time.

[johnlcnm]

Not that I am a welled healed JBL aficionado, but I highly recommend the Nelson Pass charge coupled crossover network. I am using it in my current 4333B's. You might also consider replacing the 2235/2231 with the JBL 2216nd. I think it is a much improved driver that reproduces the bass and lower mids with greater clarity.

Regards,
John

[quindecima]

Not that I am a welled healed JBL aficionado, but I highly recommend the Nelson Pass charge coupled crossover network. I am using it in my current 4333B's. You might also consider replacing the 2235/2231 with the JBL 2216nd. I think it is a much improved driver that reproduces the bass and lower mids with greater clarity.

Regards,
John

O.K. I will check that out and consider it. I would have no problems selling my 2235's thats for sure

[ivica]

Due to downsizing needs I need to make a change from my 4355's that I built and am thinking 4333's would be nice. I can use the existing components from the speakers I have now but am wondering if using the cross would be effective. I have a nice cross from a well known member here and am wondering if just not hooking up the "not needed" components would work.

Hi quindecima,

(Ex)Changing 2202 to 2123 (or similar) and having in mind 4344-II , I think, would be a better solution then 4333, off-course using 2441 with 2311&2308 horn would be very good solution. I think that, under such conditions, 2235 bass would be quite good solution.
The size of the 4333 vs 4344 box is marginal, except the height of the box.

regards
ivica

[Challenger604]

Due to downsizing needs I need to make a change from my 4355's that I built and am thinking 4333's would be nice. I can use the existing components from the speakers I have now but am wondering if using the cross would be effective. I have a nice cross from a well known member here and am wondering if just not hooking up the "not needed" components would work.

Hi there,
I just finished my 4333’s and did the Nelson Pass crossover.

I still have my 55’s but the 33’s are for my living room.

you will like it. Still very impressive speakers.

I hope you’re well!
C

[Mr. Widget]

Pretty Nice!

Congratulations!


Widget

[hoschibill]

Very nice. I like it .

[Challenger604]

Pretty Nice!

Congratulations!


Widget

Thank you!!

[quindecima]

[QUOTE=Challenger604;432466]Hi there,
I just finished my 4333’s and did the Nelson Pass crossover.

I still have my 55’s but the 33’s are for my living room.

you will like it. Still very impressive speakers.

I hope you’re well!

Still good and looking thru some of my stuff the other day I still have those connectors I was going to send to you, send me your address again.

[quindecima]

Anybody know where I can get the L pads for the 4333's?

[tjm001]

Anybody know where I can get the L pads for the 4333's?

https://www.ebay.com/itm/153892665941

[highcut28]

Really nice Challenger 604
How does one get build plans for the 4333?

[Challenger604]

Really nice Challenger 604
How does one get build plans for the 4333?

You can find it here! Easily available. Just need to figure out the deepness. Same than the 55’s actually...

The line 2405 2420 and hole is 1/4 inch lower than supposed to. But it’s ok, I can live with it...